LG PQNUD1S00 Owners & Installation Manual page 19

I When using the wireless remote controller
ON OFF
SET CANCEL
PLASMA
2. Address check mode
1) With the top right button pressed, press the Reset button.(Press the left button for more than 3 seconds.)
2) Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the set address
in the display window. (The address display time and method can differ by the indoor unit type.)
3) Reset the remote controller to use the general operation mode.
❉ The above function might not work for some remote controllers depending on the
manufactured date of the wired/wireless remote controller.
It is not relevant for the consumer use and you can set the address with a remote controller that
has the address setting functionality during the installation.
1. Address setting mode
1) x Press the top left button for more than 3 seconds.
➁ While the top left button pressed, press the Reset button.
The wireless remote controllers have different shapes
according to the model.
2) By using the temperature adjustment button, set the indoor
unit address.
Setting range: 00~FF
3) After setting the address, press the ON/OFF button toward
the indoor unit 1 time.
4) The indoor unit will display the set address to complete the
address setting. (The address display time and method can
differ by the indoor unit type.)
Temperature
adjustment
5) Reset the remote controller to use the general operation mode.
How to set each Indoor Unit
User's Manual 19