Panasonic AW?HE120WP Operating Instructions Manual page 49

Specifications
w FUNCTIONS AND PERFORMANCE
w
[Camera unit]
Imaging sensors: 1/3-type Full-HD 3MOS
Lens:
M otorized 20 zoom, F1.6 to F3.4
(f=4.5 mm to 90 mm; 35 mm
equivalent: 32.13 mm to 642.5 mm)
Focus:
Switching between auto and manual
Focus distance: E ntire zooming range:
Wide end: 400 mm (1.31 ft)
Color separation optical system:
3MOS
Minimum illumination: 7 lx (50 IRE, F1.6, 18 dB)
Horizontal resolution: 1000 TV lines Typ (Center area)
Gain selection:
Auto, 0 dB to 18 dB
Frame mix: 0 dB, 6 dB, 12 dB, 18 dB, 24 dB
w p These settings cannot be
established when 1080/59.94i or
1080/50i has been selected as the
format used.
Electronic shutter speed:
59.94 Hz
1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
50 Hz
1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
Synchro scan:
59.94 Hz 60.17 Hz to 644.26 Hz
50 Hz 50.19 Hz to 537.13 Hz
Gamma: Off, Normal (Low, Mid, High),
Cinema
White balance:
A WB A, AWB B, ATW, 3200K, 5600K
Chroma amount variability:
7 levels variability
Scene file:
Scene1, Scene2, Scene3, Scene4
Output format: 1 080/59.94p(i), 1080/59.94i,
720/59.94p, 480/59.94p(i),
480/59.94i, 1080/50p(i), 1080/50i,
720/50p, 576/50p(i), 576/50i
w p A 'P' signal is output as HDMI
output, an 'I' signal is output as
SDI and an analog output for
output formats of 1080/59.94p(i),
1080/50p(i), 480/59.94p(i) and
576/50p(i). The image quality
of 'I' signal for output formats
1080/59.94p(i) and 1080/50p(i)
deteriorates more than the output
formats of 1080/59.94i and 1080/50i,
since the signal is fed through the
P/I conversion circuit.
Synchronization system:
I nternal/External synchronization
(BBS/Tri-level sync)
(continued)
800 mm (2.62 ft)
[Pan-tilt head unit]
Installation method: S tand-alone (Desktop) or
suspended (Hanging)
p T o ensure safety, the unit must be
secured using the mount bracket
supplied.
Camera/pan-tilt head control:
IP connecting When connecting through a hub:
cable L AN cable* (category 5 or above,
straight cable), max. 100 m (328 ft)
When a hub is not used:
L AN cable* (category 5 or above,
crossover cable) max. 100 m (328 ft)
RP connecting LAN cable* (category 5 or above,
cable straight cable), max. 1000 m (3280 ft)
RS-422A, AW series protocol
*: Use of an STP (shielded twisted pair) cable is
recommended.
Pan/tilt operation speed:
Max. 60°/s
Panning range: ±175°
Tilting range:
– 30° to 210°
p D epending on the pan or tilt
position, the camera may be
reflected in the image.
Quietness:
NC35
w AC adaptor
w
Input: AC 100 V to 240 V, 1.5 A, 50/60 Hz
Output: DC 12 V, 2.5 A, 30 W
indicates safety information.
Inrush current, measured according to European standard
EN55103-1: 9 A (AC adaptor)
49