Installation And Start-Up - NEC C124 User Manual

Installation and Start-Up

1. Check if the mains voltage matches the adapter mains voltage.
2. Plug the AC adapter into the mains socket-outlet.
3. On the handset, gently slide & open the battery cover and insert the rechargeable
batteries supplied with the package. The + - poles of the batteries must correspond
to the + - markings in the battery compartment.
4. Replace the battery cover by sliding it back into place.
5. Put the handset onto the charger unit. Make sure charge indicator on the handset
unit animates to show charging in progress.
IMPORTANT NOTICE :
To obtain best battery performance, charge the handset for 12 hours before initial
use
Only charge the batteries with the C124 handset on the C124 Desktop Charger.
Do not use any other charger to this end
The C124 is not meant for 24/7 operation
Defect handsets or defect or exhausted batteries should never be disposed of as
municipal waste. For more information refer to the chapter "Environmental
protection"
6. Subscribe the handset to the DECT system using the Registration Menu in the Main
Menu.