Sanyo PLV-55WHD1 Service Manual page 25

10-1
Main board and Analog tuner unit removal.
1. Remove the 3 Screws(M3x8) and remove the Main board and analog tuner unit upward.
Main board and analog tuner unit
WARNING!
Not to damage the connector.
10-2
Main board removal.
1. Remove the 3 Screws(M3x8) and remove the shield plate top.
2. Remove the heat sink sheet and remove the 3 shield sheets.
(Do not remove when it is unnecessary. )
Main board and
analog tuner
M3X6
M3X6
M3X6
Shield plate top
- 25 -
Mechanical disassemblies
Heat sink sheet
Shield sheet
Fig. 10-a
Fig. 10-1