Table of Contents
Advertisement
Convenient functions
Changing the unit's settings (Setup)
Picture
Still Mode
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when "Automatic" is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when "Automatic" is selected. (The
picture is clearer and finer.)
Seamless Play
The segments can be played back seamlessly.
• When "Off" is selected, frame-dropping between
the segments can be avoided, but the video may
freeze for a moment between the segments.
• Seamless Play function does not work
depending on the condition or the kind of
programme.
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select "Surround encoded", when the
connected equipment supports the virtual
surround function.
• There is no effect on "Bitstream" via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in "Stereo" in the
following cases.
- AVCHD playback
- [BD-V] : Playback of clicking sound on the
menu and audio with secondary video in
picture-in-picture mode.
88
VQT4W68
Bilingual Audio Selection
Select whether to record the audio type ("M1" or
"M2") when:
- File Conversion (
48)
- Copying to a DVD-R, DVD-RW, +R and +RW.
- "Recording Format for DVD" is set to "Video
format". (
87)
Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
• On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
• Off:
Signals are output as 96 kHz.
• The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- The signals have a sampling frequency
of over 96 kHz.
- The disc has copy protection.
- "BD-Video Secondary Audio" is set to
"On". ([BD-V]) (
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
HE-AAC
Select the audio signal to output.
• Select "PCM" when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
below)
Advertisement
Table of Contents
