Discharge the
bezel
Discharge
the rear
cover/shield
1, insert a hard plastic chip in the gap
between bezel and rear cover at
up-left corner
2, Hold the monitor with a hand and
press the hard plastic chip with the
other, then move it in the forward hour
hand.
3, Pay attention to some hooks, then
open it with little force till the bezel and
rear cover separated.
4, The position marked with arrows
exists some hooks.
5, After bezel and rear cover separated,
the bezel is shown in the figure
down-left.
1. Wring down the screw in the shield,
which is marked in red.
24
S75F Sony