Turning Power On/Off - Sharp PN-K322B Setup Manual

Caution
• Turn on the monitor first before turning on the PC or
playback device.
Turning on the main power
Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch off and back on,
always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.

Turning Power On/Off

Turning power on/off
Press the power button (
To turn off the power, press and hold down the power button (
for about 2 seconds.
Green lit
Off
Orange lit
• When switching the power button (
• When the main power switch is off, the monitor cannot be
• If the monitor is in the input signal standby mode and you
) to turn the power ON/OFF.
Power lamp status
Caution
always wait for at least 5 seconds. A short interval may
result in a malfunction.
TIPS
turned on.
press the power button ( ), the monitor enters standby
mode.
Power button ( )
Power LED
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
) off and back on,
)
7
E