JVC DD-8 Instructions Manual page 53

Manufacturer codes for STBs
Examples:
For an Amstrad STB: Press [0], then [3].
For a Triax STB: Press [3], then [0].
When the manufacturer of your STB has 2 or more
codes, select the manufacturer codes in turn and
find the one that operates the STB and the remote
control properly.
Manufacturer Code
JVC 01, 02
03, 04, 05,
Amstrad
06, 31
BT 01
Canal+ 20
Canal Satellite 20
D-Box 24
17, 18, 19,
Echostar
21
Finlux 11
Force 28
Galaxis 27
Grundig 07, 08
Hirschmann 07, 17, 37
ITT Nokia 11
Jerrold 16
Kathrein 13, 14, 34
Luxor 11
6
Release [VCR/STB F].
NOTE
• Manufacturer codes are subject to change with-
out notice. You may not be able to operate the
VCR/STB produced by the manufacturer.
• After replacing the batteries of the remote con-
trol, set the manufacturer code again.
Manufacturer Code
Mascom 32
Maspro 13
Nokia 24, 26, 33
Pace 10, 25, 31
Panasonic 15
Philips 09, 23
RFT 12
Saba 35
Sagem 22, 29
Salora 11
Selector 29
Skymaster 12, 36
Thomson 35
TPS 22
Triax 30
Wisi 07
For the locations of the remote
control buttons, refer to page 46.
Using the remote control for the
VCR/STB operation
Before the VCR/STB operation, select the remote
control mode for the VCR/STB.
1
Slide the remote control
mode selector to [VCR/
STB].
2
Press [VCR] or [STB].
Operate the remote control by pointing it at the
VCR/STB.
Remote control button assigned for the VCR
operation
Remote control button Usage
[VCR/STB F]
[VCR]
[TV CHANNEL +/ ]
–
Number buttons
(1-10, 0, 10)
[DVD/CD 3]
7
8
¡
1
Remote control button assigned for the STB
operation
Remote control button Usage
[VCR/STB F]
[STB]
[TV CHANNEL +/ ]
–
Number buttons (1-9, 0,
10)
NOTE
• When the remote control mode selector is slid to
[VCR/STB], some buttons may not work.
Turns on/off the VCR.
Selects the VCR input.
Changes channels.
Selects the channels.
Starts playback.
Stops playback.
Pauses playback.
Fast-forwards the tape.
Fast-rewinds the tape.
Turns on/off the STB.
Selects the STB input.
Changes channels.
Selects the channels.
48