Caller Id - NEC Aspire Feature Handbook

Caller ID allows a display keyset to show an incoming caller's tele-
phone number (up to 12 digits) and optional name. The Caller ID
information can be displayed before and after answering a call. The
system provides the Caller ID pre-answer display which allows you to
preview the caller's number before picking up the ringing line.
Depending on programming, it may also be displayed after answering
a call. This information is stored in Abbreviated Dialing bins or under
one-touch keys.
Display telephone users have the ability to check the identity of an
incoming call while they are currently busy on a call. The type of
information that displays will depend on the type of call being
received. Intercom calls will display station names, while incoming
trunk calls will display Caller ID, ANI or the name assigned to the
line. Depending on the system programming, this information can be
displayed either automatically or manually.
Caller ID will temporarily store 50 calls (this included abandoned or
unanswered calls). New calls replace the old calls when the maximum
number of calls is reached. An unanswered call will cause the Call
History key to flash, indicating a new call has been placed in the tem-
porary memory. If enabled in programming, the telephone's display
will show "CHECK LIST".
To display Caller ID
for calls lamping your
phone or not auto-
matically displayed
( without Automatic
Handsfree enabled):
To display Caller ID
for calls in Park:
1. Do not lift the handset and press
If the Caller ID data includes the
name, you can scroll left and right by
pressing * and #.
2. or press
1. Do not lift the handset +
If Automatic Handsfree is enabled,
press FLASH then the PARK key.

Caller ID

to answer the call.
(Park).
.
29