D-Link DCS-2132L User Manual page 13

Section 2: Installation
Optional: WPS Wireless Connection
Alternatively, if your router supports WPS, you can use the WPS button on the
camera to easily create a secure wireless connection to your network.
To create a WPS connection:
Step 1
Press and hold the WPS button for approximately 5-6 seconds. The blue WPS
status LED above the button will blink.
Step 2
Within 60 seconds press the WPS button on your router. On some routers, you
may need to log in to the web interface and click on an on-screen button to
activate the WPS feature. If you are not sure where the WPS button is on your
router, please refer to your router's User Manual.
The DCS-2132L will automatically create a wireless connection to your router.
While connecting, the status LED will flash. When the connection process is
complete, the status LED will turn solid.
Note: If your router does not support WPS, you can still use the wired connection
method on the previous page. After Zero Configuration setup is complete, your
router's wireless settings will be automatically transferred to the camera.
D-Link DCS-2132L User Manual
WPS Button
13