Advertisement
Assembling the Docking Cradle
When you receive the cradle, it will be in two pieces: the easel
and the base. (See Figure 1.) To assemble the two pieces, hold
the easel with the Fujitsu logo facing towards you, and align the
tabs on the bottom of the easel with the corresponding holes in
the base. Press the easel down until it is securely in place.
DC Power Jack
USB Ports
LAN Connector
Stability Stand
External Video Connector
Figure 2. Docking Cradle - Rear
FRONT/RIGHT SIDE COMPONENTS
The following is a brief description of the Docking Cradle's
(Figure 1)
front and right side components.
Docking Connector
The docking connector mates with the connector on the bottom
of the LifeBook to connect the two electronically.
USB Port
There are four USB 2.0 ports on the Docking Cradle, one on the
right side and three on the rear. USB 2.0 ports let you connect
any USB 2.0 device for up to 480 Mbps transfer rate. USB 2.0
is backward-compatible with USB 1.1.
2
Advertisement
