Sanyo CE29FFV2-F Service Manual page 19

16 Service menu
The service menu is accessed by holding down the front key "VOL-" and simultaneously pressing the teletext
green key from the remote control. The service menu is a two level structure as shown in the diagram below.
The active keys (local or remote) in service mode are: VOL-, VOL+, P-, P+, MENU and the digits. The navigation
through this menu works the same than in the user menu.
* The P+ and P- keys allow to navigate through the options in the active menu.
* The VOL+ key opens the second level menu if available. If there is a highlighted adjustment, the VOL- and
VOL+ keys allow to change it.
* The MENU key goes back one level menu. If the active menu is the main one, it exits the service mode.
* The digit keys allow direct entry for adjustments.
* The SERVICE mode is exited by pressing any other key.
GEOMET VIF
HOR SHIFT PLL
EW AMPLIT PLL L'
PARABOLA AGC
CORNER PAR FFI
TRAPEZIUM
VERT SLOPE
VERT AMPL
S-CORREC
VERT SHIFT
CONTR TXT
WHITE G2 MORE
GREEN BRI Y/C PAL
BLUE ADJ Y/C SECAM
AKB Y/C NTSC
K-DRV
PBL SPEED
CONTR OSD
CENTR TXT
SEMI MUTE
INI NVM
SERVICE
CONFIG STANDARD
RCJAP PAL BG
SCS PAL DK
CMB PAL I
Y/C AV TXEAST SECAM BG
PAN SECAM DK
OSO SECAM L
OEM NTSC BG
16:9 NTSC M
8
Service Manual MS CE25FV2-E
V-STAT S-STAT I2C BUS