Selecting The User Clip Name Recording Method - Panasonic AG-MDR15P Operating Instructions Manual

Selecting the USER CLIP NAME
recording method
Press the [MENU] button and select [META DATA]
→ [USER CLIP NAME] to select the recording
method. 2 options are available: [TYPE1] and
[TYPE2]
USER CLIP NAME to be recorded
If clip metadata has
Uploaded data
been loaded
If no clip metadata has
Sequential
been loaded or if the
5-digit number,
setting for recording
in order of
loaded clip metadata
shooting
has been turned off
∗ The COUNT value is indicated as a 4-digit
number. If clip metadata has been loaded and
[USER CLIP NAME] → [TYPE2] has been
selected, the COUNT value is increased by 1
each time recording is performed and a new clip
is generated.
The COUNT value can be reset using the
following procedure.
Press the [MENU] button, select [META DATA] →
[CLIP COUNT RESET] → [YES], and then press
the [ENTER] button. The COUNT value is reset
to 1.
TYPE1 TYPE2
Uploaded
data +
COUNT value ∗
Sequential
5-digit number,
in order of
shooting
57