Table of Contents
Advertisement
Table 5.
Ethernet RJ45 pinouts
Pin
1
2
3
4
5
6
7
8
Power Connector
Plug the power cord into the power cord connector and then into a properly rated wall socket. Once power is
applied to the unit, it will begin its power-up procedure. The unit will begin by displaying the software version
on Monitor-A, then the unit will begin recording automatically.
Table 6.
Power supply rating
Voltage
Amps
Audio Inputs and Output
The unit is equipped with 4 audio inputs and 1 audio output. Both audio outputs and the audio input are line-
level.
Audio input
Audio out
Note:
Line-level audio requires amplification.
Use
TX+
TX-
RX+
Not connected
Not connected
RX-
Not connected
Not connected
Power supply
100-240 VAC 50-60 Hz, auto-ranging
1.65-0.85 A
RCA jack, 315 mV, 40k Ohms. Unbalanced
RCA jack, 315mV, 600 Ohms. Unbalanced
9
Advertisement
Table of Contents
