Operation Manual - Remote Power-feeding Quidway S3000-EI Series Ethernet Switches Table of Contents Table of Contents Chapter 1 Remote Power-Feeding Configuration ..............1-1 1.1 Overview ..........................1-1 1.2 Configuring Remote Power-Feeding ................. 1-1 1.2.1 Enabling/Disabling Remote Power-Feeding on a Port ........... 1-3 1.2.2 Pressing the Mode Button to Detect Power-Feeding on a Port ......
Operation Manual - Remote Power-feeding Quidway S3000-EI Series Ethernet Switches Chapter 1 Remote Power-Feeding Configuration Chapter 1 Remote Power-Feeding Configuration 1.1 Overview S3026C-PWR Ethernet Switch provides Power over Ethernet (PoE) function, which performs remote power-feeding to connected powered devices (PD) such as IP phones, WLAN APs and Network cameras, by providing -48V DC power to the attached remote PDs through twisted-pairs.
Operation Manual - Remote Power-feeding Quidway S3000-EI Series Ethernet Switches Chapter 1 Remote Power-Feeding Configuration Device Configuration Default Description Correctly connect the PD with the electrical ports of S3026C-PWR 1.2.1 Enabling/Disabling Remo te Power-Feeding on a Port ou ca n ena...
Operation Manual - Remote Power-feeding Quidway S3000-EI Series Ethernet Switches Chapter 1 Remote Power-Feeding Configuration Perform the following configurations in Ethernet port v iew. Table 1-3 Selecting the power-feeding mode on a port Operation Command Feed power through signal lines...
Operation Manual - Remote Power-feeding Quidway S3000-EI Series Ethernet Switches Chapter 1 Remote Power-Feeding Configuration manual: when power supply reaches full load, the switch only gives prompt and doesn’t supply power to the new one if a new PD is connected to the switch . For example, port A is configured with a priority of "critical"...
Operation Manual - Remote Power-feeding Quidway S3000-EI Series Ethernet Switches Chapter 1 Remote Power-Feeding Configuration 1.3 Displaying Remote Power-Fe eding After the above configuration, execute the display commands in any view to display the running of the remote power-feeding configuration, and to verify the effect of the configuration.
Operation Manual - Remote Power-feeding Quidway S3000-EI Series Ethernet Switches Chapter 1 Remote Power-Feeding Configuration VLAN interface on the switch is 1.1.1.1, and that of the PC is 2.2.2.2. The switch and PC are reachable. The PoE daughter-card application file new.bin is s tored on the PC.
Page 11
Operation Manual - Remote Power-feeding Quidway S3000-EI Series Ethernet Switches Chapter 1 Remote Power-Feeding Configuration assword:***** 230 Logged in successfully [ftp] # Type in the authorized directory of the FTP server. [ftp] cd switch # Use the get command to download the new.bin from the FTP server to the flash irectory on the FTP server.