Special Menu Setting [Special Setup]; Chroma Level Adjustment [Chroma Gain]; Aperture Level Adjustment [Ap Gain]; Pedestal Level Adjustment [Pedestal] - Panasonic WV-CP310 Operating Instructions Manual

Special menu setting [SPECIAL SETUP]

The special menu setup is performed including the setting of the camera image quality and the communication configuration when a
receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
"SPECIAL SETUP" screen
**SPECIAL SETUP**
....I..160
CHROMA GAIN
...I... 32
AP GAIN
.I..... 15
PEDESTAL
HUE ...I... 0
- +
PIX OFF
COMMUNICATION COAX
CAMERA RESET PUSH SET
SER.NO. XXXXXXXX
RET TOP END

17. Chroma level adjustment [CHROMA GAIN]

Press the [RIghT] or [LEfT] button to adjust the color density of the camera image. When the level indicator moves in the "+"
direction, the color becomes deeper, and when the level indicator moves in the "–" direction, the color becomes lighter. Be sure to
view a vector chromaticity indicator or a video monitor when the adjustment is performed.

18. Aperture level adjustment [AP GAIN]

Press the [RIghT] or [LEfT] button to adjust the image quality. When the level indicator moves in the "+" direction, the image
becomes sharper, and when the level indicator moves in the "–" direction, the image becomes softer. Be sure to view a video monitor
when the adjustment is performed.
Note:
• Moire (interference fringes) may be observed when shooting a subject with fine pattern such as a carpet or a curtain. In such a
case, move the indicator in the "-" direction to reduce moire.

19. Pedestal level adjustment [PEDESTAL]

Press the [RIghT] or [LEfT] button to adjust the pedestal level of the camera. When the level indicator moves in the "+" direction,
the image becomes brighter, and when the level indicator moves in the "–" direction, the image becomes darker. Be sure to view a
waveform monitor or a video monitor when the adjustment is performed.

20. Chroma phase (hue) adjustment [HUE]

Press the [RIghT ] or [LEfT] button to adjust the hue of the camera image. Be sure to view a vector chromaticity indicator or a video
monitor when the adjustment is performed.

21. Pixel compensation [PIX OFF]

flaws of pixel in the displayed camera image are corrected. Up to 16 points can be corrected.
follow the procedure below.
"SPECIAL SETUP" screen
**SPECIAL SETUP**
....I..160
CHROMA GAIN
...I... 32
AP GAIN
.I..... 15
PEDESTAL
HUE ...I... 0
- +
PIX OFF
COMMUNICATION COAX
CAMERA RESET PUSH SET
SER.NO. XXXXXXXX
RET TOP END
Step 1
Move the cursor to "PIX OFF" and press the [SET] button.
→ The "PIX OFF" screen appears.
"PIX OFF" screen
** PIX OFF **
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
000 000
DEL
1
RET TOP END
Pixel compensation positioning screen
23