Toshiba DX 730 User Manual page 96

System automatic
Sleep/Hibernation
Mode
Power on password
Instant security
Heat dispersal
Hibernation Mode
Sleep Mode
USB Wakeup function This function restores the computer from Sleep
User's Manual
This feature automatically shuts down the system
into either Sleep Mode or Hibernation Mode
when there is no input or hardware access for a
*1
specified time. This can be specified in the Power
Options.
Two levels of password security, supervisor and
user, are available to prevent unauthorized
access to your computer.
A specific hot key function automatically locks the
system providing data security.
*1 To protect against overheating, the processor
has an internal temperature sensor so that, if the
computer's internal temperature rises to a certain
level, the cooling fan is turned on or the
processing speed is lowered. This can be
specified in the Power Options.
This feature lets you turn off the power to the
computer without exiting from your software. The
contents of main memory are automatically
saved to the hard disk drive so that when you
next turn the power on again, you can continue
working right where you left off. Refer to the
Turning off the power
Getting Started, for more details.
If you have to interrupt your work, you can use
this feature to allow you to turn off power to the
computer without exiting from your software.
Data is maintained in the computer's main
memory so that when you next turn on the
power, you can continue working right where you
left off.
Mode depending on the external devices
connected to the USB ports.
For example, if a mouse or USB keyboard is
connected to a USB port, clicking the mouse
button or pressing the keyboard will wakeup the
computer.
section in Chapter 1,
4-6