Removal And Replacement Procedures; Back Cover - HP 10 Plus 2201 User Manual

5 Removal and replacement
procedures
CAUTION:
service provider. Accessing these components can damage the tablet or void the warranty.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for the tablet/keyboard, go to http://partsurfer.hp.com, select the country or region,
and then follow the on-screen instructions.
There are as many as 10 screws that must be removed, replaced, and/or loosened when servicing
the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

Description
Back cover (includes rear-facing webcam lens)
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
Remove the back cover:
CAUTION:
is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in
damage to the display panel.
1.
Position the tablet with the display panel facing down and the micro USB power connector
toward you.
2. Use a case utility tool (1) or similar thin, plastic tool to separate the back cover from
the display panel assembly.
Tablet components described in this chapter should only be accessed by an authorized
Before positioning the tablet with display panel facing down, make sure the work surface
Spare part number
782396-001
Back cover
15