Sony SLV-D910AZ Service Manual page 14

9
Enter the station name.
1 Press V/v to select a character.
ENTER
Each time you press V, the character
changes as shown below.
A t B t ... t Z t 0 t 1 t ... t 9
t A
2
Press b to set the next character.
The next space flashes.
To correct a character, press B/b until the character you want to correct
flashes, then reset it.
You can set up to 4 characters for the station name.
10
Press ENTER to confirm the station name.
ENTER
11 Press O RETURN, then press SET UP to exit the menu.
RETURN
SET UP
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (REGL.FIN)
function. After step 7, press V/v to select "REGL.FIN". Press B/b to get a clear
picture. Then press ENTER.
Tips
• To set the programme position for the decoder, see "Setting the Canal Plus decoder" on
page 27.
• The DVD-VCR must receive channel information for station names to appear automatically.
Note
• When adjusting REGL.FIN, the menu may become difficult to read due to interference from
the picture being received.
20
Presetting channels
3
Press V/v to select "Installation Manuelle",
then press ENTER.
ENTER
4
Press V/v to select the row containing the
programme position you want to change.
ENTER
To display other pages for programme
positions 6 to 80, press V/v repeatedly.
5
Press ENTER, then press V/v to move to the
desired programme position.
ENTER
6
Press ENTER to confirm the setting.
To change the programme position of another station, repeat steps 4 through 6.
ENTER
Press O RETURN, then press SET UP to exit the menu.
7
RETURN
SET UP
22
Presetting channels
RECHERCHE MANUELLE
SYS. : L / L'
PR : 5
CANAL : 033
REGL.FIN : –
DECODEUR : NON
NOM : O – – –
v V b B
MEMOIRE : ENTER
RETURN
LISTE STATIONS TV
PR CAN. NOM DEC SYS.
1 027 AAB – NON L / L'
2 029 LMN – NON L / L'
3 030 CDE – NON L / L'
4 032 I J K – NON L / L'
5
v V B
MODIF.ST : ENTER
RETURN
EFFACER : CLEAR
LISTE STATIONS TV
PR CAN. NOM DEC SYS.
1 027 AAB – NON L / L'
2 029 LMN – NON L / L'
3 030 CDE – NON L / L'
4 032 I J K – NON L / L'
5
v V B
MODIF.ST : ENTER
RETURN
EFFACE : CLEAR
LISTE STATIONS TV
PR CAN. NOM DEC SYS.
1 027 AAB – NON L / L'
2
3 030 CDE – NON L / L'
4 032 I J K – NON L / L'
5
029 LMN – NON L / L'
v V B
MODIF.ST : ENTER
RETURN
EFFACER : CLEAR
1-4
Changing/disabling programme positions
After setting the channels, you can change
the programme positions as you like. If any
programme positions are unused or contain
unwanted channels, you can disable them.
You can also change the station names. If the
station names are not displayed, you can
enter them manually.
Changing programme
positions
Before you start...
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press V/v to select
SET UP
(OPTION) and press ENTER.
ENTER
2
Press V/v to select "Installation", then press
ENTER.
ENTER
The "INSTALLATION" menu appears.
Disabling unwanted programme positions
After presetting channels, you can disable
unused programme positions. The disabled
positions will be skipped later when you
press the PROG +/– buttons.
Before you start...
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press V/v to select
SET UP
(OPTION) and press ENTER.
ENTER
2
Press V/v to select "Installation", then press
ENTER.
ENTER
The "INSTALLATION" menu appears.
SET UP
V/v/B/b
ENTER
O RETURN
OPTION
:Français
Langue
L'horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
Messages Ecran
[ Oui ]
V v ENTER RETURN SET UP
INSTALLATION
Installation Auto
Installation Manuelle
V v
ENTER RETURN SET UP
continued
21
Presetting channels
CLEAR
SET UP
V/v/B/b
ENTER
O RETURN
OPTION
Langue :Français
L'horloge
Installation
Réglages Utilisateur
Veille Auto [ Non ]
Messages Ecran
[ Oui ]
V v
ENTER RETURN SET UP
INSTALLATION
Installation Auto
Installation Manuelle
V v ENTER RETURN SET UP
continued
23
Presetting channels