Canon iPF9000S Troubleshooting Manual page 27

Panel display
Code
(last 4
Large LCD
digits)
201A Paper not aligned
with right guide.
Press OK and
then reload the
roll paper.
Paper not aligned
with right guide.
Push the release
lever back, then
reload the paper.
201B Roll paper is not
securely in contact
with roll holder.
Press OK, then
re-attach the roll
paper.
201C Paper jam
Push the release
lever back.
201D Paper jam
Remove the paper
after cutting at the
top of feed slot. Push
the release
lever back.
201E Media Type not
compatible with
cassette.
Check Media Type.
Stop: Stop Printing
Small Small
LCD 1 LCD 2
When loading cut sheet, paper (right) side
detection was failed.
When loading roll paper, paper (right) side
detection was failed.
While printing, paper width was detected to
have fluctuated beyond the predefined value.
While printing, paper width was detected to
have fluctuated beyond the predefined value.
Media Cas Paper mismatch (cut sheet)
Check Cannot Cassette pickup has been specified for
Please Feed paper that does not support cassette pickup.
Cancel Please
Check
Explanation/Detection sequence
2-15
Chapter 2 Indexes by Case
Remedial Action
(★: Reference fault
isolation procedure
or tool)
The error is
cleared by
releasing the
release lever. After
that, load paper to
the correct
position.
Paper is ejected
automatically, and
by pressing the
[OK] button the
error is cleared.
After that, load
paper to the
correct position.
By releasing the
release lever,
move to the
loading sequence,
and load paper to
the correct
position.
①Cut the paper
near the feed
slot, and remove
the paper.
②Release the
release lever,
and load the
paper to the
correct position.
Check the
cassette pick-up
setting/paper
type.