Distractions can cause you to lose control. Technical Data 2) ELECTRICAL SAFETY DCL023-XE a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Voltage Unmodified plugs and matching outlets will reduce risk of electric shock.
Page 4
f) If operating a power tool in a damp location is unavoidable, use a residual c) Disconnect the plug from the power source and/or the battery pack from current device (RCD) protected supply. Use of an RCD reduces the risk of the power tool before making any adjustments, changing accessories, electric shock.
Electrical Safety CAUTION: Do not hold flashlight in your mouth. Injury to you or a bystander could The electric motor has been designed for one voltage range only. Always check that result. the power supply corresponds to the voltage on the rating plate. 220–240 V AC •...
• Charge the battery packs only in designated D WALT chargers. the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts. • DO NOT splash or immerse in water or other liquids. • Contents of opened battery cells may cause respiratory irritation. Provide fresh •...
of improper extension cord could result in risk of fire, electric shock or is on the same side as the charging light (E). The red (charging) light will blink electrocution. continuously, indicating that the charging process has started. • When operating a charger outdoors, always provide a dry location and use an 3.
LEAVING THE BATTERY PACK IN THE CHARGER 6. Foreign materials of a conductive nature such as, but not limited to, grinding dust, The charger and battery pack can be left connected with the charge indicator showing metal chips, steel wool, aluminum foil, or any buildup of metallic particles should Pack Charged.
Page 9
To remove the battery pack from the tool, press the release button (C) and firmly pull FIG 2. the battery pack out of the tool handle. Insert it into the charger as described in the charger section of this manual. Switch (Fig.
Page 10
Accessories WARNING: Since accessories, other than those offered by D WALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only D WALT recommended accessories should be used with this product.