Husqvarna 1200 Service Manual page 7

Service tools
1. Fixed spanner 10mm to set the belt, long (P.12) and
the gap between the hook and the needle (P.28).
Ref. No 411 85 99-01
2. Fixed spanner 5mm to set the stitch plate in relation
to the needle (P.29).
Ref. No 411 85 98-01
3. Fixed spanner 5,5mm for the sidewards setting of the
feed dog (P.34).
Ref. No 411 54 31-01.
4. Adam keys:
-0.9mm for the timing of the step motor of the
thread tension (P.33).
Ref. No 412 27 71-01.
-1,5mm for needle clamp and step motors.
Ref. No 411 66 89-01.
-2,5mm for the timing of the hook in relation to the
needle (P.30) and for the gap between the hook
cover and the driver (P.24).
Ref. No 411 86 01-01.
5. Shortened adam key 2,5mm for the setting of the
presser foot (P.25) and of the needle in relation to
the presser foot (P.27).
Ref. No 412 27 65-01.
6. Key to set the stitch length balance (P.36-40).
Ref. No 412 27 66-01.
7. Magnetic screwdriver with two separate heads.
Ref. No 411 54 33-01.
8. Screwdriver Torx 10
Ref. No 412 36 48-01.
Screwdriver Torx 20
Ref. No 412 36 49-01.
Screwdriver Torx 25
Ref. No 412 36 50-01.
9. Angle key for Torx 6
Ref. No 412 27 67-01.
10.Wristband for ESD
Ref. No 412 23 02-01.
11.Extractor tool (p. 45).
Ref. No 412 27 98-01.
SEWKNITWORLD
104 72 30-26 Husqvarna service manual 7