1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. Net PC 20
  6. User manual

HP Notebook pc User Manual

Notebook pc
Hide thumbs Also See for Notebook pc:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, User Manual
HP Notebook PC User Guide

Advertisement

Table of Contents
loading

Related Manuals for HP Notebook pc

Summary of Contents for HP Notebook pc

  • Page 1 HP Notebook PC User Guide...
  • Page 2 Company under license. Microsoft and To obtain the latest information in the HP Windows are U.S. registered trademarks of Notebook PC User Guide, go to the HP Web Microsoft Corporation. SD Logo is a site at http://www.hp.com/support. trademark of its proprietor.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Using the wireless controls ....................17 Using the wireless button ....................18 Using Wireless Assistant software (select models only) ............ 18 Using HP Connection Manager (select models only) ............19 Using operating system controls ..................19 Using a WLAN ............................ 20 Setting up a WLAN ......................
  • Page 6 Inserting a SIM ........................24 Removing a SIM ........................ 25 Using Bluetooth wireless devices ....................... 26 Bluetooth and Internet Connection Sharing (ICS) ............. 26 Troubleshooting wireless connection problems ................. 27 Cannot connect to a WLAN ....................27 Cannot connect to a preferred WLAN network ..............28 Network icon for WLAN is not displayed ................
  • Page 7 Removing a USB device ................... 49 Using Digital Media Slot cards ................... 49 Inserting a digital card ..................49 Removing a digital card ..................50 6 Memory modules 7 Pointing devices and keyboard Setting pointing device preferences ....................55 Using pointing devices ........................55 Using the TouchPad ......................
  • Page 8 Maximizing battery discharge time ..................67 Managing low battery levels ....................67 Identifying low battery levels ................67 Resolving a low battery level ................68 Resolving a low battery level when external power is available ..68 Resolving a low battery level when a charged battery is available ...................
  • Page 9 11 Setup Utility (BIOS) Starting Setup Utility ........................... 84 Using Setup Utility ..........................85 Changing the language of Setup Utility ................85 Navigating and selecting in Setup Utility ................85 Displaying system information ................... 86 Restoring default settings in Setup Utility ................86 Exiting Setup Utility ......................

  • Page 11: Using Hp Quickweb (Select Models Only)

    HP QuickWeb is also referred to as Instant-On Software (IOS). NOTE: You can access the software Help when you are in HP QuickWeb by clicking the Help icon in the notification area.

  • Page 12: Starting Hp Quickweb

    NOTE: The HP QuickWeb Configuration Tool can also be accessed by clicking Start, clicking Control Panel, and then clicking the View by arrow. Select Large icons or Small icons to locate the HP QuickWeb Configuration Tool. Chapter 1 Using HP QuickWeb (select models only)

  • Page 13: Hardware Features

    Hardware features Identifying the hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features on most computer models. To see a list of hardware installed in the computer: Select Start > Control panel > System and Security. In the System area, click Device Manager.

  • Page 14: Top Components

    Top components TouchPad Component Description TouchPad* Moves the pointer and selects or activates items on the screen. Left TouchPad button* Functions like the left button on an external mouse. Right TouchPad button* Functions like the right button on an external mouse. TouchPad scroll zone Scrolls up or down.

  • Page 15: Lights

    Lights Component Description Caps lock light On: Caps lock is on. Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. ● Wireless light On: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth...

  • Page 16: Buttons

    Buttons Component Description ● Power button* When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.

  • Page 17: Keys

    Keys Component Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key. Windows ® logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer.

  • Page 18: Front Components

    Front components Component Description Speakers (2) Produce sound. ● Battery light On: A battery is charging. ● Blinking: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly.

  • Page 19: Right-Side Components

    Right-side components Component Description Digital Media Slot Supports the following optional digital card formats: ● Memory Stick (MS) ● Memory Stick Pro (MS/Pro) ● MultiMediaCard (MMC) ● Secure Digital (SD) Memory Card ● xD-Picture card Audio-out (headphone) jack/Audio-in (microphone) Produces sound when connected to optional powered jack stereo speakers, headphones, earbuds, a headset, or television audio.

  • Page 20: Left-Side Components

    Left-side components Component Description Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Power connector Connects an AC adapter.

  • Page 21: Display Components

    Display components Component Description Internal display switch Turns off the display if the display is closed while the power is on. Webcam light On: The webcam is in use. Webcam Captures still photographs and videos. NOTE: To capture videos, you must install additional webcam software.

  • Page 22: Bottom Components

    Bottom components Component Description Battery release latches (2) Release the battery from the battery bay. Battery bay Holds the battery. Vents (4) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

  • Page 23: Wireless Antennas

    Wireless antennas Component Description WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLANs). WWAN antennas (2) (select models only)* Send and receive wireless signals to communicate with wireless wide-area networks (WWANs). *The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions.

  • Page 24: Additional Hardware Components

    Additional hardware components Component Description Power cord* Connects an AC adapter to an AC outlet. Battery* Powers the computer when the computer is not plugged into external power. AC adapter Converts AC power to DC power. *Batteries and power cords vary in appearance by country or region. Chapter 2 Hardware features...

  • Page 25: Identifying The Labels

    An optional device may be a wireless local area network (WLAN) device. You may need this information when traveling internationally. ◦ The serial number of your HP Mobile Broadband Module. The regulatory label is affixed inside the battery bay. Identifying the labels...

  • Page 26: Wireless And Local Area Network

    ● HP Mobile Broadband Module—A wireless wide area network (WWAN) device that provides access to information wherever mobile network operator service is available. In a WWAN, each mobile device communicates to a mobile network operator’s base station. Mobile network operators install networks of base stations (similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries.

  • Page 27: Identifying Wireless And Network Status Icons

    Network (disabled/disconnected) Indicates that one or more network drivers are installed, but no wireless connections are available (or all wireless network devices are disabled by the wireless button or HP Wireless Assistant). Using the wireless controls You can control the wireless devices in your computer using these features: ●...

  • Page 28: Using The Wireless Button

    Windows ® Mobility Center. Click Properties. Select the check box next to HP Wireless Assistant icon in notification area. Click Apply. Click Close. For more information, refer to the Wireless Assistant software Help: Open Wireless Assistant by clicking the wireless icon in Windows Mobility Center.

  • Page 29: Using Hp Connection Manager (Select Models Only)

    Using HP Connection Manager (select models only) You can use HP Connection Manager to connect to WWANs using the HP Mobile Broadband device in your computer (select models only). To start Connection Manager, click the Connection Manager icon in the notification area, at the far right of the taskbar.

  • Page 30: Using A Wlan

    Using a WLAN With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other devices and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably. ●...

  • Page 31: Protecting Your Wlan

    Protecting your WLAN Because the WLAN standard was designed with only limited security capabilities—basically to foil casual eavesdropping rather than more powerful forms of attack—it is essential to understand that WLANs are vulnerable to well-known and well-documented security weaknesses. WLANs in public areas, or “hotspots,” like coffee shops and airports may not provide any security. New technologies are being developed by wireless manufacturers and hotspot service providers that make the public environment more secure and anonymous.

  • Page 32: Connecting To A Wlan

    Connecting to a WLAN To connect to the WLAN, follow these steps: Be sure that the WLAN device is on. If it is on, the wireless light is blue. If the wireless light is amber, press the wireless button. Click the network icon in the notification area, at the far right of the taskbar. Select your WLAN from the list.

  • Page 33: Using Hp Mobile Broadband (Select Models Only)

    HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a mobile phone network operator.

  • Page 34: Inserting A Sim

    Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated. Replace the battery. NOTE: HP Mobile Broadband is disabled if the battery is not replaced. Reconnect external power. Reconnect external devices.

  • Page 35: Removing A Sim

    Turn the computer upside down on a flat surface, with the battery bay toward you. Remove the battery. Press in on the SIM (1), and then remove it from the slot (2). Replace the battery. Reconnect external power. Reconnect external devices. Turn on the computer. Using HP Mobile Broadband (select models only)

  • Page 36: Using Bluetooth Wireless Devices

    Bluetooth and Internet Connection Sharing (ICS) HP does not recommend setting up one computer with Bluetooth as a host and using it as a gateway through which other computers may connect to the Internet. When two or more computers are connected using Bluetooth, and Internet Connection Sharing (ICS) is enabled on one of the computers, the other computers may not be able to connect to the Internet using the Bluetooth network.

  • Page 37: Troubleshooting Wireless Connection Problems

    Troubleshooting wireless connection problems Some possible causes for wireless connection problems include the following: ● Network configuration (SSID or security) has been changed. ● Wireless device is not installed correctly or has been disabled. ● Wireless device or router hardware has failed. ●...

  • Page 38: Cannot Connect To A Preferred Wlan Network

    A Windows “Device not Found” error message may also be displayed. The driver must be reinstalled. Get the latest version of the WLAN computer software and drivers for your computer from the HP Web site at http://www.hp.com.

  • Page 39: Wlan Connection Is Very Weak

    If you are provided with new wireless network keys and SSID for a network, and if you have previously connected to that network, follow the steps below to connect to the network: Select Start > Control Panel > Network and Internet > Network and Sharing Center. Click Manage wireless networks in the left panel.

  • Page 40: Connecting To A Local Area Network (Lan)

    Connecting to a local area network (LAN) Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer. To connect the network cable: WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem...

  • Page 41: Multimedia

    Multimedia Multimedia features Your computer includes multimedia features that allow you to listen to music, watch movies, and view pictures. Your computer may include the following multimedia components: ● Integrated speakers for listening to music ● Integrated microphone for recording your own audio ●...

  • Page 42: Identifying Your Multimedia Components

    Identifying your multimedia components The following illustration and table describe the multimedia features of the computer. Component Description Webcam light On: The webcam is in use. Webcam Captures still photographs and videos. NOTE: To capture videos, you must install additional webcam software.

  • Page 43: Adjusting The Volume

    Component Description Volume mute hotkey Mutes speaker sound when pressed in combination with the key. Volume down hotkey Decreases speaker sound when pressed in combination with key. Volume up hotkey Increases speaker sound when pressed in combination with key. Adjusting the volume You can adjust the volume using the following controls: ●...
  • Page 44 If the Speakers icon is not displayed in the notification area, follow these steps to add it: Right-click the Show hidden icons icon (the arrow at the left side of the notification area). Click Customize notification icons. Under Behaviors, select Show icon and notifications for the Volume icon. Click OK.

  • Page 45: Multimedia Software

    Multimedia software Your computer includes preinstalled multimedia software that allows you to play music, watch movies, and view pictures. Using preinstalled multimedia software To locate other preinstalled multimedia software: Select Start > All Programs, and then open the multimedia program you want to use. For example, ▲...

  • Page 46: Audio

    Audio Your computer has a variety of audio features that allow you to: ● Play music using your computer speakers and/or connected external speakers. ● Record sound using the internal microphone or an optional external headset microphone. ● Download music from the Internet. ●...

  • Page 47: Video

    NOTE: For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware and Sound > Sound. Video Your computer enables you to use a variety of video features: ●...

  • Page 48: Connecting An Hdmi Device

    Connecting an HDMI device The computer includes an HDMI (High Definition Multimedia Interface) port. The HDMI port connects the computer to an optional video or audio device, such as a high-definition television, or any compatible digital or audio component. NOTE: To transmit video signals through the HDMI port, you need an HDMI cable (purchased separately).

  • Page 49: Webcam

    Webcam Your computer includes an integrated webcam, located at the top of the display. The webcam is an input device that allows you to capture and share video. To access the webcam: Select Start > All programs > ArcSoft WebCam Companion 3 > WebCam Companion 3. Click Capture >...

  • Page 50: Drives And External Devices

    Drives and external devices Drives Identifying installed drives Your computer includes a hard drive (with a rotating disc) or a solid state-drive (SSD) with solid-state memory. Because an SSD has no moving parts, it does not generate as much heat as a hard drive. To view the drives installed on the computer, select Start >...

  • Page 51: Handling Drives

    Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply. CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss of information, observe these precautions: Before you move a computer that is connected to an external hard drive, initiate Sleep and allow the screen to clear, or properly disconnect the external hard drive.

  • Page 52: Improving Hard Drive Performance

    Improving hard drive performance Using Disk Defragmenter As you use the computer, files on the hard drive become fragmented. Disk Defragmenter consolidates the fragmented files and folders on the hard drive so that the system can run more efficiently. To run Disk Defragmenter: Select Start >...

  • Page 53: Replacing The Hard Drive In The Hard Drive Bay

    Replacing the hard drive in the hard drive bay CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
  • Page 54 Pull the hard drive tab (2) up and lift the hard drive (3) out of the hard drive bay. To install a hard drive: Grasp the hard drive tab (1) and insert the hard drive (2) into the hard drive bay, until the rubber stops slide into place.
  • Page 55 Tighten the 2 hard drive cover screws (2). Drives...

  • Page 56: Using External Drives

    Using external drives Removable external drives expand your options for storing and accessing information. USB drives include the following types: ● 1.44-megabyte diskette drive ● Hard drive module (a hard drive with an adapter attached) ● DVD-ROM Drive ● DVD/CD-RW Combo Drive ●...

  • Page 57: Connecting Optional External Drives

    Connecting optional external drives NOTE: For more information about required software and drivers, or to learn which computer port to use, refer to the manufacturer's instructions. To connect an external drive to the computer: CAUTION: To reduce the risk of damage to the equipment when connecting a powered drive, be sure that the drive is turned off and the AC power cord is unplugged.

  • Page 58: External Devices

    External devices Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Devices can be connected to the system, an optional docking device, or an optional expansion product.

  • Page 59: Removing A Usb Device

    Removing a USB device CAUTION: To prevent loss of information or an unresponsive system, use the following procedure to safely remove the USB device. CAUTION: To prevent damage to a USB connector, do not pull on the cable to remove the USB device. To remove a USB device: Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar.

  • Page 60: Removing A Digital Card

    Insert the card into the Digital Media Slot, and then push in on the card until it is firmly seated. You will hear a sound when the device has been detected, and a menu of options may be displayed. Removing a digital card CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to safely remove the digital card.

  • Page 61: Memory Modules

    Memory modules The computer has one memory module slot, which is located inside the hard drive bay. The memory capacity of the computer can be upgraded by replacing the existing memory module. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module.

  • Page 62: 6 Memory Modules

    Lift the hard drive cover (2) away from the computer. Remove the existing memory module: Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
  • Page 63 Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. Align the notched edge (1) of the memory module with the tab in the memory module slot. With the memory module at a 45-degree angle from the surface of the hard drive bay, press the module (2) into the memory module slot until it is seated.
  • Page 64 Tighten the 2 hard drive cover screws (3). Replace the battery. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer. Chapter 6 Memory modules...

  • Page 65: Pointing Devices And Keyboard

    Pointing devices and keyboard Setting pointing device preferences To access Mouse Properties, select Start > Devices and Printers. Then, right-click the device representing your computer, and select Mouse. Use Mouse Properties in Windows ® to customize settings for pointing devices, such as button configuration, click speed, and pointer options.

  • Page 66: Using The Keyboard

    Using the keyboard Using hotkeys Hotkeys are combinations of the key (1) and one of the function keys (2). The icons on the through f4, and f6, f8, f10, and keys represent the hotkey functions. Hotkey functions and procedures are discussed in the following sections. Function Hotkey Initiate Sleep.

  • Page 67: Initiating Sleep

    To use a hotkey command on the device keyboard, follow either of these steps: ● Briefly press the key, and then briefly press the second key of the hotkey command. – or – ● Press and hold down the key, briefly press the second key of the hotkey command, and then release both keys at the same time.

  • Page 68: Decreasing Screen Brightness

    Decreasing screen brightness Press fn+f3 to decrease screen brightness. Hold down the hotkey to decrease the brightness level incrementally. Increasing screen brightness Press fn+f4 to increase screen brightness. Hold down the hotkey to increase the brightness level incrementally. Initiating QuickLock Press fn+f6 to initiate the QuickLock security feature.

  • Page 69: Power Management

    Power management Setting power options Using power-saving states The computer has two power-saving states enabled at the factory: Sleep and Hibernation. When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory, letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates Hibernation.

  • Page 70: Initiating And Exiting Hibernation

    ● Press a key on the keyboard or button on the remote control (select models only). ● Activate the TouchPad. When the computer exits Sleep, the power light turns on and your work returns to the screen where you stopped working. NOTE: If you have set a password to be required on wakeup, you must enter your Windows password before your work will return to the screen.

  • Page 71: Using Power Plans

    Using power plans A power plan is a collection of system settings that manages how the computer uses power. Power plans can help you conserve power or maximize performance. You can change power plan settings or create your own power plan. Viewing the current power plan Click the battery meter icon in the notification area, at the far right of the taskbar.

  • Page 72: Using External Ac Power

    External AC power is supplied through one of the following devices: WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. ● Approved AC adapter ●...

  • Page 73: Connecting The Ac Adapter

    Connecting the AC adapter WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer).

  • Page 74: Using Battery Power

    WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Computer battery life varies, depending on power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors.

  • Page 75: Displaying The Remaining Battery Charge

    Displaying the remaining battery charge Move the pointer over the battery meter icon in the notification area, at the far right of the taskbar. ▲ Inserting or removing the battery CAUTION: Removing a battery that is the sole power source may cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery.

  • Page 76: Charging A Battery

    Slide the battery release latches (1) to release the battery, and then remove the battery (2). Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, or an optional expansion product.

  • Page 77: Maximizing Battery Discharge Time

    Maximizing battery discharge time Battery discharge time varies depending on the features you use while on battery power. Maximum discharge time gradually shortens, as the battery storage capacity naturally degrades. Tips for maximizing battery discharge time: ● Lower the brightness on the display. ●...

  • Page 78: Resolving A Low Battery Level

    Resolving a low battery level CAUTION: To reduce the risk of losing information when the computer reaches a critical battery level and has initiated Hibernation, do not restore power until the power lights turn off. Resolving a low battery level when external power is available Connect one of the following devices: ▲...

  • Page 79: Calibrating A Battery

    Calibrating a battery Calibrate a battery under the following conditions: ● When battery charge displays seem inaccurate ● When you observe a significant change in battery run time Even if a battery is heavily used, it should not need to be calibrated more than once a month. It is also not necessary to calibrate a new battery.

  • Page 80: Step 3: Discharge The Battery

    Step 3: Discharge the battery The computer must remain on while the battery is being discharged. The battery can discharge whether or not you are using the computer, but the battery will discharge faster while you are using it. ● If you plan to leave the computer unattended during the discharge, save your information before beginning the discharge procedure.

  • Page 81: Step 5: Reenable Hibernation And Sleep

    Step 5: Reenable Hibernation and Sleep CAUTION: Failure to reenable Hibernation after calibration may result in a full battery discharge and information loss if the computer reaches a critical battery level. Click the battery meter icon in the notification area, and then click More power options. –...

  • Page 82: Conserving Battery Power

    Conserving battery power ● Select Start > Control Panel > System and Security > Power Options > Power saver. ● Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them. ● Disconnect external devices that are not plugged into an external power source, when you are not using them.

  • Page 83: Shutting Down The Computer

    Shutting down the computer CAUTION: Unsaved information will be lost when the computer is shut down. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions: ●...

  • Page 84: Security

    Security Protecting the computer Standard security features provided by the Windows operating system and the non-Windows Setup Utility can protect your personal settings and data from a variety of risks. Follow the procedures in this chapter to use the following features: ●...

  • Page 85: Using Passwords

    Using passwords A password is a group of characters that you choose to secure your computer information. Several types of passwords can be set, depending on how you want to control access to your information. Passwords can be set in Windows or in the non-Windows Setup Utility preinstalled on the computer. CAUTION: To prevent being locked out of the computer, record each password you set.

  • Page 86: Setting Passwords In Setup Utility

    Setting passwords in Setup Utility Password Function Administrator password* ● Protects access to Setup Utility. ● After this password is set, it must be entered each time you access Setup Utility. CAUTION: If you forget your administrator password, you cannot access Setup Utility. ●...

  • Page 87: Entering An Administrator Password

    Your changes go into effect when the computer restarts. Entering an administrator password At the Enter Password prompt, type your administrator password, and then press enter. After 3 unsuccessful attempts to enter the administrator password, you must restart the computer and try again. Power-on password Your power-on password prevents unauthorized use of the computer.

  • Page 88: Using Antivirus Software

    To access Norton Internet Security, or to get more information about it, click Start > All Programs > Norton Internet Security. NOTE: HP recommends that you always update the antivirus software to help protect your computer. NOTE: For more information about computer viruses, type viruses in the Search box in Help and Support.

  • Page 89: Installing Critical Updates

    Installing critical updates CAUTION: Microsoft sends alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. Updates to the operating system and other software may have become available after the computer was shipped.

  • Page 90: 10 Software Updates

    10 Software updates Updated versions of the software provided with your computer may be available on the HP Web site. Most software and BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.

  • Page 91: Updating The Bios

    Updating the BIOS To update the BIOS, first determine what BIOS version you currently have and then download and install the new BIOS. Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer, you need to know the version of the system BIOS currently installed.
  • Page 92 To download a BIOS update: Access the page on the HP Web site that provides software for your computer: Select Start > Help and Support > Maintain > Software Updates. Follow the instructions on the screen to identify your computer and access the BIOS update you want to download.

  • Page 93: Updating Programs And Drivers

    To download and install software other than a BIOS update, follow these steps: Access the page on the HP Web site that provides software for your computer: Select Start > Help and Support, and then select the software and drivers update.

  • Page 94: Setup Utility (Bios)

    11 Setup Utility (BIOS) Starting Setup Utility Setup Utility is a ROM-based information and customization utility that can be used even when your Windows ® operating system is not working. The utility reports information about the computer and provides settings for startup, security, and other preferences.

  • Page 95: Using Setup Utility

    Using Setup Utility Changing the language of Setup Utility The following procedure explains how to change the language of Setup Utility. If Setup Utility is not already running, begin at step 1. If Setup Utility is already running, begin at step 2. Open Setup Utility by turning on or restarting the computer.

  • Page 96: Displaying System Information

    Displaying system information You can use Setup Utility to view such information as the system time and date and information that identifies the computer. The following procedure explains how to do this. If Setup Utility is not open, begin at step 1. If Setup Utility is open, begin at step 2. Open Setup Utility by turning on or restarting the computer.

  • Page 97: Exiting Setup Utility

    Exiting Setup Utility You can exit Setup Utility with or without saving changes. ● To exit Setup Utility and save your changes from the current session: If the Setup Utility menus are not visible, press to return to the menu display. Then use the arrow keys to select Exit >...

  • Page 98: System Configuration Menu

    (0, 5, 10, 15, 20). ● HP QuickWeb—Enable/disable the HP QuickWeb Boot Menu during POST. ◦ Delay to boot Windows—Set the delay for the HP QuickWeb Boot Menu to 2, 3, 5, 10, 15, or 30 seconds. ● CD-ROM Boot―Enable/disable boot from CD-ROM. ●...

  • Page 99: Index

    Index BIOS, updating 81 digital card AC adapter Blu-ray Disc ROM with SuperMulti inserting 49 connecting 63 DVD±R/RW Double Layer 46 removing 50 identifying 14 Bluetooth device 16 stopping 50 testing 63 boot options 88 supported formats 49 administrator password boot order 88 Digital Media Slot, identifying 9 creating 76...
  • Page 100 11 external 46 Setup Utility 88 wireless 5 installing 44 using 1 local area network (LAN) removing 43 HP USB Ethernet Adapter, cable required 30 replacing 43 connecting 30 connecting cable 30 hard drive hubs 48 low battery level 67...
  • Page 101 Disk Cleanup 42 identifying 7 computer 15 Disk Defragmenter 42 Windows logo key, identifying 7 programs, updating 83 HP Connection Manager 19 Windows, passwords set in 75 projector, connecting 37 installing 35 wireless antennas 13 public WLAN connection 22 multimedia 35...
  • Page 102 wireless network (WLAN) connecting 22 corporate WLAN connection 22 equipment needed 20 functional range 22 public WLAN connection 22 security 21 WLAN 12 WLAN antennas, identifying 13 WLAN device 16 writable media 59 WWAN antennas, identifying 13 WWAN device 23 Index...

Table of Contents