Check The Print Quality; Wireless Setup - Brother MFC-J432W Quick Start Manual

6

Check the print quality

a
When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes) to
finish the quality check and go to step 7.
If you can see missing short lines, press 2 (No)
and follow the steps on the LCD.
OK
Poor
7

Wireless setup

(if needed)
For wireless setup using a Macintosh computer or
mobile device, go to a.
For Windows users (all connections) and Macintosh
USB connections, go to b.
a
If you are using a Macintosh computer or a
mobile device on a wireless network, press
OK.
Press a or b to choose Yes.
Press OK.
Then go to step 17 on page 19 to continue the
wireless setup.
After finishing the wireless setup you will need
to return to step 8 to finish the machine setup.
Note
You can choose No to configure the wireless
settings later.
b
If you are using a Windows
to connect your Macintosh using USB, press
OK.
Press a or b to choose No.
Press OK.
Then go to step 8.
The wireless setup for Windows
covered in later steps.
®
computer or want
®
users will be
7