Toshiba e-Studio 452 Operator's Manual page 286

5.Jam Symbols (Cont.)
2
Lift the paper guide as indicated by the
arrow and remove any misfed paper.
3
Lower the paper guide and return the automatic duplexer to the origi-
nal position.
• Be sure to close both sides of the automatic duplexer firmly.
Releasing a paper misfeed in the jam releasing cover
1
Make sure that the bypass tray is
opened, and then open the automatic
duplexer.
• When you open the automatic duplexer, the jam releasing cover
will be opened.
9
2
Rotate the green knob as indicated by
the arrow toward the inside and remove
any misfed paper.
3
Return the jam releasing cover, the automatic duplexer and the
bypass tray to the original positions.
• Returning the automatic duplexer to the original position will close the jam releasing cover.
• Be sure to close both sides of the automatic duplexer firmly.
284
9.BLINKING GRAPHIC SYMBOLS