Recording From Video Equipment - Panasonic DMR-BW880 Operating Instructions Manual

Recording from external equipment
Recording from video
equipment
≥Turn off the unit and other video equipment before
connecting.
e.g., Connecting to the AV2 IN or DV IN terminals on the
front
This unit
DV IN
DV cable
(IEEE 1394,
4-pin)
Other video equipment
Connect to terminals of the same colour.
§
When recording from the unit's DV terminal
≥Select the audio type in "Audio Type for DV Input" (
≥When recording from DV equipment (e.g., digital video
camcorder), you can record audio/video recordings from
the DV tape only.
≥ The video quality will be degraded.
≥ While copying from DV input or executing the "Flexible Recording via AV
input" ( 61)
– Copy will stop when timer recording starts.
– Simultaneous rec and play, switching of input cannot be performed.
60
VQT2X37
AV2 IN
VIDEO L/MONO-AUDIO-R
Audio/Video
cable
§
Connect to Audio/Video
output terminals.
Manual recording
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP
1
While stopped
Press [INPUT SELECT] to select the input
channel.
e.g., If you have connected to AV2 terminals, select
"AV2".
2 Press [REC MODE] to select the recording
mode.
3 Start play on the connected equipment.
4 Press [¥ REC].
Recording starts.
5 Set the time to record (
To skip unwanted parts
Press [;] to pause recording.
≥Press again to restart recording.
To stop recording
Press [∫].
79).
24, step ).