Removing Shipping Materials - Canon FAX-L380 Quick Reference Manual

Removing Shipping Materials

In order to protect your machine during shipping, the machine has been packed with protective
material that you must remove before using. Follow these steps:
NOTE
The actual shipping materials may differ in shape, quantity, and position from the ones shown in the illustrations
below.
1
1
Remove all pieces of shipping tape from the exterior of the machine.
2
Open the document feeder tray.
3
Open the operation panel by grasping it at the center and gently pulling it up.
Remove protective sheet from the Automatic Document Feeder (ADF), then gently close the operation
panel by pressing it down until it clicks.
4
Open the printer cover.
5
Remove all pieces of shipping tape from the inside of the machine.
Unpacking Your Machine
1-3