Problem Solving Guide; Technical Problems - Miele G5930 Operating Instructions Manual

With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.

Technical problems

Problem
The display remains
dark and the Standby
indicator light is not
flashing after the
dishwasher has been
switched on with the K
sensor.
The dishwasher stops
during a programme.
Possible cause
The appliance is not
plugged in.
The mains fuse has
tripped.
The mains fuse has
tripped.

Problem solving guide

Remedy
Insert the plug and switch
on at the socket.
Reset the trip switch or
replace the fuse in the
plug.
(Minimum fuse rating - see
data plate).
– Reset the trip switch or
replace the fuse in the
plug (minimum fuse
rating - see data plate).
– If the mains fuse trips
again, call the Miele Ser-
vice Department.
53