Stereo Chorus - Sony DPS-V55 Manual

2 Channel Effects
19 Stereo Chorus (Chorus)
This is a standard chorus effect.
Chorus adds a sense of expansion and
depth.
z
Generally speaking, you can fatten
longer sounds (like strings or a chorus)
by combining a large Depth and a slower
(small) Rate. On the other hand, it's
generally more effective to set a smaller
Depth and then adjust the Rate to obtain
an effective chorus for rapidly decaying
sounds (like electric-piano or electric
guitars).
You can also make other changes, like
setting a lower LPF to create a smoother
analog-like sound. Higher settings create
a clearer chorus sound.
Parameters
No. Name
– FxA(B) On/Off
1 Rate
2 Depth
3 LFO Form
4 PreDelay
5 LPF
6 Spread
7 Direct Level
8 Effect Level
Range Comments
On, Off Turns the effect on or off.
0 ~ 100 Sets the rate (frequency or modulation speed) of the low frequency oscillator (LFO).
The modulation cycles become faster as you increase this value.
0 ~ 100 Sets the depth of the low frequency oscillator (LFO). The sense of modulation
becomes stronger as you increase this value. There is no chorus effect at 0%.
Sin, Tri Selects the modulation waveform. Generally, Sin (sine wave) produces a deeper,
undulating effect, and Tri (symmetrical triangular wave) produces a cleaner, gentle
effect with less modulation.
0 ~ 500 ms Determines how long it will take to activate the chorus effect.
100 Hz ~ Thru LPF blocks all frequencies higher than the one set in this parameter. Useful for
softening the chorus. LPF is inactive when set to "Thru".
0 ~ 20 Determines the amount of expansion between the two channels. There is no effect
when set to "0".
0 ~ 100 Determines the level of the direct sound.
0 ~ 100 Determines the level of the effect sound.
23