Setup Items - Mitsubishi Electric FREQROL Connection Manual

4

Setup Items

Set up the Display's communication settings in GP Pro-EX or in the Display's offline mode.
The setting of each parameter must match that of the External Device.
"3 Communication Settings" (page 10)
4.1 Setup Items in GP Pro-EX
Communication Settings
To display the setup screen, from the [System Settings] workspace, select [Device/PLC].
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
GP-Pro EX Device/PLC Connection Manual
Select the SIO type to communicate with the External Device.
In the communication setting, confirm the serial interface specifications of the Display and
set [SIO Type] correctly.
If you select an SIO type the serial interface does not support, we cannot guarantee the
operation.
Please refer to the manual of the Display for more detail on the serial interface
specifications.
Select communication speed between the External Device and the Display.
Select data length.
Select how to check parity.
Select stop bit length.
Setup Description
58
FREQROL Inverter Driver
Continues to the next page.