2.
ASSEMBLY
• This set can be assembled in the order shown below.
2-1. ASSEMBLY FLOW
2-2. INSERT A DISC
2-3. PLATE CHAS BOTTOM ASSY
2-4. HBD-28T
Note: Follow the assembly procedure in the numerical order given.
2-2. INSERT A DISC
1 Apply 4.5V loading voltage to the 2P connector to insert a disc.
disc
Note 1: With no disc inserted, the loader and the bottom chassis cannot be assembled.
Note 2: Don't turn over or swing the set with a disc inserted.
(Page 7)
(Page 8)
(Page 8)
MV-900SDS
2P connector
7