32
Connecting Your TV
Connecting a digital audio system
Press the ( /
3
then press the ENTER button.
(Sample Image) Sound menu - Audio Setup selection
Press the ( /
4
Format.
5
Press the ( /
PCM, depending on your device, see
audio output format" on page
(Sample Image) Audio Setup screen - Done
6
To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset, and then
press the ENTER button.
NOTE
arrow) buttons to highlight Audio Setup, and
arrow) buttons to select Optical Output
arrow) buttons to select either Dolby Digital or
❖
Some audio systems may not be compatible with Dolby Digital
bitstream signals. Older audio systems that are not compatible
with standard optical out signals may not work properly, creating
a high noise level that may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.
❖
The DIGITAL AUDIO OUT terminal may not output some digital
audio sources because of copy restrictions.
"Selecting the optical
82.