Manual Configuration - D-Link DIR-615 User Manual

Section  - Configuration
Enable Wireless: Check the box to enable the wireless function.
If you do not want to use wireless, uncheck the
box to disable all the wireless functions.
Wireless Network
Service Set Identifier (SSID) is the name of your
Name: wireless network. Create a name using up to 32
characters. The SSID is case-sensitive.
Enable Auto The Auto Channel Scan setting can be selected
Channel Scan:
to allow the DIR-615 to choose the channel with
the least amount of interference.
Wireless Channel:
Indicates the channel setting for the DIR-615.
By default the channel is set to 6. The Channel
can be changed to fit the channel setting for an
existing wireless network or to customize the
wireless network. If you enable Auto Channel
Scan, this option will be greyed out.
802.11 Mode:
Select one of the following:
802.11g Only - Select if all of your wireless
clients are 802.11g.
Mixed 802.11g and 802.11b - Select if you
are using both 802.11b and 802.11g wireless
clients.
802.11b Only - Select if all of your wireless
clients are 802.11b.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Channel Width:
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
D-Link DIR-615 User Manual

Manual Configuration

0