HP Compaq 6000 Reference Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Desktop
  5. Compaq 6000
  6. Reference manual
HP Compaq 6000 Reference Manual

HP Compaq 6000 Reference Manual

Pro all-in-one business pc
Hide thumbs Also See for Compaq 6000:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
Hardware Reference Guide
HP Compaq 6000 Pro All-in-One Business PC

Advertisement

Table of Contents
loading

Related Manuals for HP Compaq 6000

Summary of Contents for HP Compaq 6000

  • Page 1 Hardware Reference Guide HP Compaq 6000 Pro All-in-One Business PC...
  • Page 2 Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright.

  • Page 3: About This Book

    About This Book This guide provides basic information for upgrading this computer model. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
  • Page 4 About This Book ENWW...

  • Page 5: Table Of Contents

    Table of contents 1 Product Features ....................... 1 Overview ..........................1 Front Components ........................3 Side Components ........................4 Rear Components ........................5 Keyboard Features ........................6 Remote Control Features ......................6 Adjusting Tilt and Swivel ......................9 2 Hardware Upgrades ....................... 11 Warnings and Cautions ......................
  • Page 6 Appendix B Computer Operating Guidelines, Routine Care and Shipping Preparation ..43 Computer Operating Guidelines and Routine Care ..............43 Optical Drive Precautions ......................44 Shipping Preparation ......................44 Index ..........................45 ENWW...

  • Page 7: Product Features

    Product Features Overview Figure 1-1 HP Compaq 6000 Pro All-in-One Business PC The HP Compaq 6000 Pro All-In One Business PC offers the following features: Integrated All-in-One form factor ● 21.5-inch diagonal widescreen Full HD WLED anti-glare display (1080p) ●...
  • Page 8 Removable panels on the back of the chassis allow administrators to easily and efficiently service ● the PC HP SkyRoom full version for professional quality visual collaboration built on HP Video and Image ● processing engines for hi-fi audio, hi-def video, and hi-performance 3D application sharing...

  • Page 9: Front Components

    Front Components Figure 1-2 Front Components Table 1-1 Front Components Component Component Dual microphone array (optional) Power button and LED Webcam (optional) IR Receiver and LED (select models only) 21.5-inch diagonal 16:9 widescreen LED-backlit full High-performance stereo speakers HD LCD display Front Components ENWW...

  • Page 10: Side Components

    Side Components Figure 1-3 Side Components Table 1-2 Side Components Component Component HP 6-in-1 Media Card Reader Tray-load optical drive (optional) IEEE 1394 port Optical drive activity LED (2) USB 2.0 ports Optical drive eject button Headphone jack Brightness increase button...

  • Page 11: Rear Components

    Memory access panel TV tuner coax jack (optional) Power connector with LED indicator DisplayPort RJ-45 Gigabit Ethernet port Memory location USB 2.0 port (Reserved for the optional USB Wireless Micro-receiver - for HP wireless keyboard and mouse) Rear Components ENWW...

  • Page 12: Keyboard Features

    Keyboard Features Figure 1-5 Keyboard Features Table 1-4 Keyboard Features Component Component Sleep Fast Forward Fast Reverse Mute Volume Play/Pause Decrease Volume Stop Increase Volume Remote Control Features NOTE: A remote control is included with select models only. Chapter 1 Product Features ENWW...
  • Page 13 Figure 1-6 Remote Control Features Table 1-5 Remote Control Features Button Function On/Off Puts the computer into and out of a power-reduced Sleep mode. It does not turn the computer off. Visualization Displays visual imagery synchronized to the sound of the music tracks. Music (Windows Media Center only) Opens the Music Library window in Windows Media Center.
  • Page 14 Table 1-5 Remote Control Features (continued) Button Function More Info Displays available information about a selected media file and displays other menus. Start Opens Windows Media Center main menu. Volume Increases (+) or decreases (–) volume. Mute Turns computer sound off. The word “Mute” displays onscreen when Mute is turned Record Records a selected television program and stores it on the hard disk drive.

  • Page 15: Adjusting Tilt And Swivel

    Adjusting Tilt and Swivel Tilt the computer forward up to 5 degrees or backward up to 30 degrees to set it to a comfortable eye level. Figure 1-7 Adjusting Tilt The computer has a swivel wheel on the underside of the base that allows you to swivel the computer left or right for the best viewing angle.
  • Page 16 Figure 1-8 Adjusting Swivel Chapter 1 Product Features ENWW...

  • Page 17: Hardware Upgrades

    To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo. WARNING! Computers that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause personal injury.

  • Page 18: Additional Information

    Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.

  • Page 19: Replacing The Center Access Panel

    Replacing the Center Access Panel Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage. Insert the tabs on the bottom of the access panel into the slots on the chassis (1) then press the top of the panel straight down (2) so that it snaps in place.
  • Page 20 Route the power supply cable through the hole in the center of the stand then Insert the circular end of the power supply cord through the hole on the bottom left side of the port cover (1) and route it out the back of the port cover (2). Figure 2-3 Inserting Power Supply Cord through Port Cover Hole Connect the power supply cord to the power connector on the rear of the computer (1), connect...

  • Page 21: Removing The Port Cover

    Turn off the computer and unplug the power cord from the power outlet. Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.

  • Page 22: Removing The Drive Access Panel

    Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.

  • Page 23: Replacing The Drive Access Panel

    Removing the Drive Access Panel Replacing the Drive Access Panel Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.

  • Page 24: Removing The Memory Access Panel

    Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.

  • Page 25: Replacing The Memory Access Panel

    Removing the Memory Access Panel Replacing the Memory Access Panel Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.

  • Page 26: Removing And Installing Memory

    Place the access panel on the rear of the computer so that the edge of the panel is slightly hanging off the edge of the computer and slide the panel toward the center of the computer. Figure 2-10 Replacing the Memory Access Panel Replace the center access panel (see Replacing the Center Access Panel on page 13).
  • Page 27 Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.
  • Page 28 If you are adding a second SODIMM, remove the SODIMM from the top (black) socket to access the bottom (white) socket. Press outward on the two latches on each side of the SODIMM (1) then pull the SODIMM out of the socket (2). Figure 2-11 Removing a Memory Module Chapter 2 Hardware Upgrades...

  • Page 29: Removing And Installing An Optical Drive

    Slide the new SODIMM into the socket at approximately a 30° angle (1) then press the SODIMM down (2) so that the latches lock it in place. Figure 2-12 Installing a Memory Module NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket.
  • Page 30 Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.
  • Page 31 Insert a tool into the slot behind the drive (1) and push the drive out of the bay, then slide the drive out of the computer (2). Figure 2-14 Removing an Optical Drive Remove the screw and security bracket on the rear of the drive. You will need to install the bracket on the replacement drive.

  • Page 32: Installing An Optical Drive

    Installing an Optical Drive If you are replacing an existing optical drive, follow the instructions to remove the drive (see Removing an Existing Optical Drive on page 23). If you are installing an optical drive in a bay that did not previously have a drive in it, follow steps 1 through 7 in Removing an Existing Optical Drive on page 23 then proceed to install the drive.

  • Page 33: Replacing The Hard Drive

    Secure the drive in place by installing the security screw next to the rear of the drive. Figure 2-18 Installing the Optical Drive Security Screw Replace the drive access panel (see Replacing the Drive Access Panel on page 17). Replace the center access panel (see Replacing the Center Access Panel on page 13).
  • Page 34 Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage. Remove the center access panel (see Removing the Center Access Panel on page 12).
  • Page 35 Grasp the handle on top of the hard drive cage and slide the cage toward the outer edge of the computer, then lift the cage out of the computer. Figure 2-20 Removing the Hard Drive Cage Replacing the Hard Drive ENWW...
  • Page 36 To remove the hard drive from the hard drive cage, remove the four screws that secure the drive to the cage (1), and then slide the drive out of the cage (2). Figure 2-21 Removing a 3.5-Inch Hard Drive from the Hard Drive Cage Figure 2-22 Removing a 2.5-Inch Hard Drive from the Hard Drive Cage Chapter 2 Hardware Upgrades...
  • Page 37 Slide the new hard drive into the hard drive cage (1) making sure that the connectors on the hard drive are aligned with the notched out area on the cage, and then install the four screws that secure the drive to the cage (2). Figure 2-23 Installing a 3.5-Inch Hard Drive in the Hard Drive Cage Figure 2-24...
  • Page 38 Set the hard drive cage down into the bay and slide it back toward the center of the computer until it stops. Figure 2-25 Installing the Hard Drive Cage Tighten the captive screw to secure the hard drive cage in place. Figure 2-26 Tightening the Hard Drive Security Screw Replace the drive access panel (see...

  • Page 39: Installing A Security Lock

    Replace the center access panel (see Replacing the Center Access Panel on page 13). Lock any security devices that were disengaged when the center access panel was removed. Reconnect the power cord and turn on the computer. Installing a Security Lock A security lock (sold separately) enables you to secure your computer from theft and unwanted changes.
  • Page 40 Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.
  • Page 41 Slide the stand toward the logo about 2.5 cm (1 inch) (1), tilt the stand base upward, and then slide it back (away from the logo) (2) to lift it off the computer. Figure 2-29 Removing the Stand Remove the two VESA hole knockouts from the center access panel and the two VESA hole knockouts from the rear panel below the center access area.
  • Page 42 VESA mounting holes on the computer. NOTE: HP offers an optional monitor arm specifically designed for this product. To attach the computer to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the computer is safely attached.

  • Page 43: Synchronizing The Optional Wireless Keyboard Or Mouse

    Turn on the computer. Insert the wireless receiver into a USB port on the computer. HP recommends connecting the receiver to the USB port located between the power connector and the PS/2 keyboard connector on the rear I/O panel.

  • Page 44: Connecting The Computer To A Set-Top Box

    Press the Connect button on the bottom of the mouse (2) for fives seconds. The blue activity LED from the wireless receiver illuminates when the synchronization command has been received and turns off when synchronization is complete. Press the Connect button on the bottom of the keyboard (3) for five seconds. The blue activity LED from the wireless receiver illuminates when the synchronization command has been received and turns off when synchronization is complete.
  • Page 45 To use the remote control properly, connect an IR emitter (blaster) cable to the IR Out connector on the computer (3), remove the paper from the backing tape on the end of the IR emitter cable (4), and then press the end of the cable over the remote IR sensor (receiver) window on the set-top box (5).

  • Page 46: Connecting An Optional Displayport Video Adapter

    NOTE: DisplayPort adapters and cables are purchased separately. HP offers a DisplayPort to VGA adapter, a DisplayPort to DVI adapter, and a DisplayPort to HDMI adapter. Turn off power to the computer and the second display that you are connecting to the computer.
  • Page 47 Connect a cable (VGA, DVI. or HDMI, depending on your application) between the adapter (2) and a second display (3). Turn on power to the computer and the second display. NOTE: Use the graphics card software or the Windows Display Settings to configure the second display as a mirrored image of the primary monitor or an extension of the primary monitor.

  • Page 48: Appendix A Electrostatic Discharge

    ● Use a portable field service kit with a folding static-dissipating work mat. ● If you do not have any of the suggested equipment for proper grounding, contact an HP authorized dealer, reseller, or service provider. NOTE: For more information on static electricity, contact an HP authorized dealer, reseller, or service provider.

  • Page 49: Appendix B Computer Operating Guidelines, Routine Care And Shipping Preparation

    Computer Operating Guidelines, Routine Care and Shipping Preparation Computer Operating Guidelines and Routine Care Follow these guidelines to properly set up and care for the computer: Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold. ●...

  • Page 50: Optical Drive Precautions

    CAUTION: If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized HP service provider. Shipping Preparation Follow these suggestions when preparing to ship the computer: Back up the hard drive files on PD discs, tape cartridges, CDs, or USB flash drives.

  • Page 51: Index

    Index IR emitter shipping preparation 44 additional information 12 connecting 38 side components 4 specifications memory 20 center access panel keyboard stand removing 12 features 6 removing 33 replacing 13 synchronizing wireless 37 swivel adjustment 9 components synchronizing wireless keyboard front 3 and mouse 37 memory...

This manual is also suitable for:

Compaq 6000 pro

Table of Contents