Page 1
Model MARKETING OBJECTIVE The new Model RB 14DSL is a cordless blower applicable to 14.4 V slide-type lithium-ion battery. (1) Applicable to the newly developed lithium-ion battery (14.4 V 3.0 Ah, sold separately). This battery can be fully charged in 45 minutes.
1. Safety instructions -----------------------------------------------------------------------------------------------4 2. Precautions requiring particular attention during sales promotion -----------------------------------6 REPAIR GUIDE------------------------------------------------------------------------------------------------------------------7 1. Precautions in disassembly and reassembly --------------------------------------------------------------7 2. Precautions in disassembly and reassembly of battery charger --------------------------------------8 STANDARD REPAIR TIME (UNIT) SCHEDULES----------------------------------------------------------------------9 Assembly diagram for RB 14DSL...
Perimeter of the handle grip Measuring point Perimeter 125 mm 115 mm Light weight 1.5 kg The Model RB 14DSL is light- 480 mm weight (1.5 kg) and compact. It is convenient for operation in narrow spaces. 230 mm 145 mm...
Page 4
8 V). Charge the battery immediately in such case. 2 The motor may stop if the Model RB 14DSL is overloaded. In such case, release the switch and eliminate the cause of the overload problem. Then the Model RB 14DSL will be operable.
SPECIFICATIONS 1. Specifications RB 14DSL Model Air volume 0 to 2.2 m /min Air pressure 0 to 3.9 kPa (0.57 psi) Continuous working 15 min. (with BSL 1430 battery) time per charge Type of motor DC magnet motor Enclosure Main body : ABS resin...
1. Safety instructions In the interest of promoting the safest and most efficient use of the Model RB 14DSL cordless blower by all of our customers, it is very important that at the time of sale, the salesperson carefully ensures that the buyer seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the meaning of the precautions listed on the caution plate and name plate attached to each tool.
Page 7
(11) Keep the battery out of dust. • Protect the battery from being covered with dust during operation. • Protect the battery from being covered with dust accumulated on the Model RB 14DSL during operation. • Do not leave the battery in a dusty area when not in use.
(1) Use the cordless blower for comparatively light work. Because the Model RB 14DSL is battery-operated, the output of the motor in cordless blower is rather low in comparison with conventional electric power tools. Accordingly, it is not suitable for continuous blowing in succession which creates a heavy load.
1.Precautions in disassembly and reassembly The [Bold] numbers in the description below correspond to the item numbers in the Parts List and the exploded assembly diagram for the Model RB 14DSL. Disassembly 1. Removal of the fan Be sure to draw on work gloves before holding the Fan [12] to prevent injury to fingers.
Reassembly Reassembly can be accomplished by following the disassembly procedures in reverse. However, special attention should be given to the following items. 1. Reassembly of the power supply unit Perform wiring according to the wiring diagram. DC-Trigger Switch [3] Black Printed Circuit Board [2] Black Black...
STANDARD REPAIR TIME (UNIT) SCHEDULES Variable MODEL Fixed Work Flow RB 14DSL General Assembly Housing (R) Housing (L) DC-Trigger Switch Motor Holder Motor Holder Motor Motor Plate...
Page 12
LIST NO. H809 CORDLESS BLOWER Model RB 14DSL (E1)