Straightening Hair - Beko BKK 1174 SD User Manual

3 Operation

3.6 Straightening hair

WARNING: The
housing of the appli-
ance becomes very
A
hot near the heating
plates (1). Do not
touch the housing
near the heating
plates (1).
C
Release the plate
lock (7) if necessary.
1. Plug the power cord (6) into the
wall socket.
2. Switch the appliance on by
pressing the On/Off button (5)
for 2 seconds. The LCD lights
up in blue.
3. Press the heat setting buttons
"+" (3) or "-" (4) to set the de-
sired temperature. Heat set-
ting button "-" (4) to reduce
the temperature in 10°C inc-
rements, "+" (3) increases the
temperature in 10°C incre-
ments.
12 / 27 EN
Select the lowest
temperature setting
C
the first time you use
the appliance. There
are 9 temperature
levels available (140-
220°C).
When the appliance
C
reaches the set
temperature, a signal
sounds meaning that
it is ready to use.
The appliance is able
to reach the maxi-
C
mum temperature in
120 seconds, while
it reaches 100°C in
only 30 seconds.
4. Comb or brush out a strand of
your hair about 3 cm wide star-
ting at the neck.
5. Place the strand of hair betwe-
en the plates (1) as close to the
hair line as you can and then
close them.
A
WARNING: Do not
touch the plates (1)
as they are very hot.
Hair Straightener / User Manual