Table of Contents
Advertisement
HDD200 Decoder
Using Your HDD200
A protective film covers the lens cover on the front panel (upper left corner). This
MUST be removed before plugging the unit into the electrical outlet.
After plugging in your HDD200, let it "warm up" for 30 seconds.
When tuned to a high definition channel, the HDD200 decoder will first display a
program or other banners and will then display HD video. Press EXIT or VIEW
on your television remote control to remove a banner and display video more
quickly.
HDD200 Menu Options
There are three menus available from the front panel of the HDD200. These menu
options allow the user to change the viewing and language settings, the video
position and the aspect ratio of the viewing screen. To access these menus, the
HDD200 must be powered off (the television must be on).While pressing the CC
button on the front panel, also press the POWER button. The HD System Settings
menu will appear on your TV.
HD System Settings Menu
To scroll through the list of options, use the POWER button on the front panel. To
make a selection or change an item, press the CC button. For example, if you wish
to change the language setting to French, press Power once, then press the CC
button to select the French language option. Press POWER to move to "Save &
Exit" which will exit the menu and return to television viewing.
HDD200 User Guide
13
Advertisement
Table of Contents
