Table of Contents
Advertisement
Troubleshooting
Problem
The unit does not work. L When the indicators do not light, the AC adaptor is not
While talking using the
handset, sound cuts in
and out.
A repeating tone is
heard while talking
using the handset.
or
The & indicator
continues to light
amber and the w
indicator flashes green.
14
Cause/solution
connected properly. Check the connections.
L When the indicators do not light green, move the unit
closer to the base unit.
L Registration may have been cancelled.
Deregister the unit, then re-register.
Deregister:
1
Unplug the AC adaptor, then press and hold
{PROGRAM}.
2
While pressing and holding {PROGRAM},
re-connect the AC adaptor.
3
Keep pressing and holding {PROGRAM} for about
10 seconds until the & indicator stops flashing and
lights red. Then release {PROGRAM}.
L The & and w indicators light amber for about 2
seconds and the & indicator flashes red again.
L If the & indicator flashes green after releasing
{PROGRAM}, deregistration failed. Deregister
the unit again.
Re-register: Unplug the AC adaptor, then perform
from step 2, "Installation/Registering the DECT
repeater to the base unit", page 11.
L The handset is out of range. Move the handset closer
to this unit.
L {PROGRAM} was pressed. The unit is in
programming mode. To exit, press {PROGRAM}
again. Do not press {PROGRAM}, except when
deregistering the unit.
Hide quick links:
Advertisement
Table of Contents
