Requesting A Reprogram (Astro 25 Trunking Only); Classifying Regrouped Radios - Motorola ASTRO APX 7000 Series Quick Reference Card

during special operations and is enabled by a qualified radio
technician.
You will not notice whether your radio has this feature enabled
until a dynamic regrouping command is sent by the dispatcher.
Note: If you try to access a zone or channel that has been
reserved by the dispatcher as a dynamically regrouped
mode for other users, an invalid tone sounds.
Procedure:
1
When your radio is dynamically regrouped, it automatically
switches to the dynamically regrouped channel. A "gurgle"
tone sounds and the display shows the dynamically
regrouped channel's name.
2
Press the PTT button to talk. Release PTT button to listen.
When the dispatcher cancels dynamic regrouping, the radio
automatically returns to the zone and channel that you were
using before the radio was dynamically regrouped.

Requesting a Reprogram (ASTRO 25 Trunking Only)

This feature lets you notify the dispatcher that you want a new
dynamic regrouping assignment.
Procedure:
Press the preprogrammed Reprogram Request button to send
reprogram request to the dispatcher and proceed to Step 3 of
the procedure below.
34
English
OR
Follow the procedure below.
< >
to Rpgm.
1
or
Press the Menu Select button directly below Rpgm to send
2
reprogram request to the dispatcher.
The display shows Reprgrm rqst.
3
4
If you hear one beep:
Press the PTT button to send the reprogram request again
H
or press to cancel and return to the home display.
OR
If you hear five beeps, the dispatcher has acknowledged the
reprogram request. Your radio returns to the home display.
OR
If the dispatcher does not acknowledge the reprogram
request within six seconds, a low-pitched alert tone sounds
and the display shows No Acknowldg.
H
Try again or press to cancel and return to the home
display.

Classifying Regrouped Radios

The dispatcher can classify regrouped radios into either of two
categories: Select Enabled or Select Disabled.
•
Select-enabled radios are free to change to any available
channel, including the dynamic-regrouping channel, once the
user has selected the dynamic-regrouping position.