Lenovo 8200 Series Installation Manual page 94

3. On the adapter properties page, click the Diagnostics tab. Figure 49 shows the Diagnostics page.
Figure 49: Diagnostics Tests on Windows
4. Under Diagnostic Tests, select one or more check boxes indicating the tests you want to run:
Hardware Test, Register Test, Interrupt Test, Loopback Test, and Link Test. ("Windows Diagnostic
Test Descriptions" on page 79 describes each test type.)
5. Click Run Tests.
Note: Only one test can run at a time. Multiple tests can run sequentially.
8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter
76
Page