Dell W2306C Service Manual page 16

Setting an access Code
After you enter the parental Control menu for the first time, you can set your own four-digit access code. If for any
reason you lose or forget you access code, you can use the default code.
1. In the parental control menu, select change code.
2. Using the number pad on the remote control, enter a new access code.
3.Select Exit.
TV Menu Setup
TV Menu Setup allows you to adjust the appearance of the TV menu, to change the language of the TV menu and to
restore factory setting.
Use the TV menu setting menu you can select TV Button lock to lock the TV menu and the side panel buttons, when
this option is enabled, only the power button functions. To unlock the TV menu and side panel buttons:
1. Press the menu button on the TV.A message appears stating that the TV is locked.
2. While the message is on the TV, press the channel up and volume increase button simultaneously.
Setting you cable channel
Your TV is set to automatically detect whether you are using an antenna or cable and then set the available channels,
some cable providers use an older cable standard that the TV can not automatically detect. If you have your TV
connected but can only view channels 5 and 6,complete the following steps:
1. Press the menu button, the remote control or TV and enter the TV menu.
2. Select setup and then select channel setup.
3. In channel setup, select Antenna/Cable, and then toggle to cable.
4. If selecting cable does not resolve the issue, repeat steps 1 through step 3 using each available channel setup
option (HRC, IRC, and Antenna) until you can view all channels.
15
Dell W2306C