PRIMARY AND SECONDARY SHEAVES
REMOVING THE PRIMARY AND
SECONDARY SHEAVES
1.Loosen:
Nut (secondary sheave) 1
●
Nut (primary sheave) 2
●
NOTE:
Use the sheave holder 3 to hold the primary
●
sheave.
First, loosen the nut (secondary sheave) 2,
●
then loosen the nut (primary sheave) 1.
Sheave holder:
P/N. YU-01880, 90890-01701
DISASSEMBLING THE SECONDARY
SHEAVE
1.Remove:
Nut 1
●
*****************************************************
Removing steps:
●
Attach the sheave fixed block 2, locknut
wrench 3 and sheave spring compressor 4
to the secondary sheave assembly.
Sheave fixed block:
P/N. YM-04135, 90890-04135
Locknut wrench:
P/N. 90890-01348
Sheave spring compressor:
P/N. YM-04134, 90890-04134
●
Place the sheave fixed block in a vise and
secure it.
●
Tighten the sheave spring compressor nut 5
and compress the spring.
●
Loosen the nut 1 with the locknut wrench
3.
●
Remove the nut 1.
●
Remove the sheave spring compressor and
locknut wrench.
*****************************************************
4 - 55
ENG