6. Installing the Secondary Funnel
Install the secondary funnel onto the lever assembly.
Clip the secondary funnel on the 2 shafts and make sure every clips are correctly linked.
Ycci System Control
You can use the Ycci system as the kit funnel.
You can control the operation timing by using the YMS software packed together with the kit
ECU.
You can also control the STD funnel by using the YMS software.
This set is made by MG Competition. For details of the specification, please check with MG
Competition.
TEL
+33 (0) 4 50 25 59 96
FAX
+33 (0) 4 50 25 59 98
Web
http://www.mgcompetition.fr/
– 14 –