Specifications - Sharp PN-70TA3 Operation Manual

Hide thumbs Also See for PN-70TA3:
Table of Contents

Advertisement

nProduct Specifications
Model
LCD component
Max. resolution
Max. colors
Pixel pitch
Viewing angle
Screen active area
Computer input signal
Sync signal
Video color system
Plug and play
Power management
Input terminals
PC/AV
PC
Audio
Output terminals
Video/Audio
Audio
LAN terminal
Speaker output (internal/external)
Touch Panel
Detection method
PC connector
Touch pen
Touch pen adapter port
WHITEBOARD
LAN terminal
mode
USB port
Power requirement
Operating temperature *
2
*
Operating humidity *
3
Power consumption
(Maximum / input signal waiting mode *
whiteboard standby mode / standby mode *
Dimensions (excluding protrusions)
Weight
*1
D-sub input terminal only.
*2
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*3
In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.
*4
When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF.
*5
When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.

Specifications

PN-70TA3
70" Class [69-1/2 inch (176.6cm)
diagonal] TFT LCD
(pixels) 1920 x 1080
Approx. 1.06 billion colors
0.802 mm (H) × 0.802 mm (V)
160° right/left/up/down (contrast ratio ≥ 10)
60-9/16 (W) x 34-1/16 (H)
inch (mm)
(1538.9 x 865.6)
Analog RGB (0.7 Vp-p) [75 Ω], DisplayPort 1.1a
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green
Composite sync (TTL: positive/negative)
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
VESA DDC2B
VESA DPMS
HDMI x 3
Mini D-sub 15 pin, 3 rows x 2
DisplayPort x 1
3.5 mm mini stereo jack x 2
DisplayPort x 1
3.5 mm mini stereo jack x 1
10 BASE-T/100 BASE-TX
10 W + 10 W/10 W + 10 W 6 Ω
Infrared blocking detection method
USB (2.0 compliant) (Type B) x 2
Wireless communication method
(2.4 GHz, IEEE 802.15.4 compliant, DS-SS method)
USB (2.0 compliant) (Type A)
10 BASE-T/100 BASE-TX/1000 BASE-T
USB (2.0 compliant) (Type A) x 4
AC 100 V - 240 V, 3.0 A, 50/60 Hz
41°F to 95°F (5°C to 35°C)
3
20% to 80% (no condensation)
250 W / 35 W / 9 W / 3.5 W
/
4
)
5
inch (mm) Approx. 64-13/16 (W) x 3-11/16 (D)
x 39-3/4 (H) (1647 x 94 x 1010)
lbs. (kg) Approx. 134.5 (61)
PN-60TA3
60" Class [60-1/16 inch (152.5cm)
diagonal] TFT LCD
0.692 mm (H) × 0.692 mm (V)
52-5/16 (W) x 29-7/16 (H)
(1329.1 x 747.6)
*1
AC 100 V - 240 V, 2.5 A, 50/60 Hz
210 W / 35 W / 9 W / 3.5 W
Approx. 56-9/16 (W) x 3-11/16 (D)
x 35-1/16 (H) (1437 x 94 x 890)
Approx. 105.9 (48)
*1
,
65
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn-60ta3

Table of Contents