Smartcard Reader; Inserting The Smartcard; Using The Security Function Of The Tablet Buttons; Assigning The Supervisor Password - Fujitsu LIFEBOOK T904 Operating Manual

SmartCard reader

Securityfunctions Securityfunctions
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
With the appropriate software you can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two SmartCards. Always keep one of the SmartCards
in a safe place if you are carrying the other SmartCard with you.

Inserting the SmartCard

Do not use force when inserting and removing the SmartCard.
Make sure that foreign objects do not fall into the SmartCard reader.

Using the security function of the tablet buttons

If you have allotted a supervisor and/or user HDD password in the form of tablet button combinations
as described below, you can use the tablet buttons to enter this when you start your device.

Assigning the supervisor password

► Select Start - Run.
► Enter the following information in the prompt: C:\Program Files\Fujitsu\Security
Panel Application\Supervisor\FJSECS.EXE.
► Confirm with Enter
► Follow the instructions on the screen.
Fujitsu
.
► Slide the SmartCard into the SmartCard
reader with the chip facing upwards
(or downwards depending on the
device) and to the front.
Security functions
69