JVC GR-AX838EG Instruction Manual

Compact vhs camcorder

Advertisement

2
EN
Dear Customer,
Thank you for purchasing the JVC Compact VHS
camcorder. Before use, please read the safety
information and precautions contained in the following
pages to ensure safe use of your new camcorder.
Using This Instruction Manual
• All major sections and subsections are listed in the Table
Of Contents (
pg. 3).
• Notes appear after most subsections. Be sure to read
these as well.
• Basic and advanced features/operation are separated for
easier reference.
It is recommended that you . . .
...... refer to the Index (
yourself with button locations, etc. before use.
...... read thoroughly the Safety Precautions that follow and
cautions (
pgs. 43, 44). They contain extremely
important information regarding the safe use of your
new camcorder.
SAFETY
PRECAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
CAUTIONS:
To prevent shock, do not open the cabinet. No user
serviceable parts inside. Refer servicing to qualified
personnel.
When you are not using the AC Power Adapter/
Battery charger for a long period of time, it is
recommended that you disconnect the power cord
from AC outlet.
NOTES:
The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of the
main unit.
The rating plate (serial number plate) of the AC
Power Adapter/Charger is on its bottom.
PAL
Camcorder is designed exclusively for the
VHS-C video cassette. Only cassettes marked
VHS-C can be used with this unit.
HQ VHS is compatible with existing VHS
equipment.
pgs. 40 – 42) and familiarize
Warning on lithium battery
The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 100°C or incinerate.
Replace battery with Panasonic (Matsushita Electric),
Sanyo or Maxell CR2025; use of another battery may
present a risk of fire or explosion.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in fire.
This camcorder is designed to be used with PAL-type
colour television signals. It cannot be used for
playback with a television of a different standard.
However, live recording is possible anywhere. Use the
BN-V12U/V22U/V25U battery packs and, to recharge
them, the provided multi-voltage AC Power Adapter/
Charger. (An appropriate conversion adapter may be
necessary to accommodate different designs of AC
outlets in different countries.)
This unit is produced to comply with Standard IEC
Publ. 65.
IMPORTANT
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power
point, then obtain an appropriate safety approved
extension lead or consult your dealer.
BE SURE to replace the fuse only with an identical
approved type, as originally fitted, and to replace the
fuse cover.
If nonetheless the mains plug is cut off ensure to
remove the fuse and dispose of the plug immediately,
to avoid a possible shock hazard by inadvertent
connection to the mains supply.
If this product is not supplied fitted with a mains plug
then follow the instructions given below:
DO NOT make any connection to the Larger Terminal
coded E or Green.
The wires in the mains lead are coloured in accord-
ance with the following code:
If these colours do not correspond with the terminal
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured
black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt — consult a competent electrician.
Blue to N (Neutral) or Black
Brown to L (Live) or Red

Advertisement

Table of Contents
loading

Summary of Contents for JVC GR-AX838EG

  • Page 1 Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents ( pg.
  • Page 2: Table Of Contents

    MAJOR FEATURES Program Manager ( pg. 14 – 23) Programme AE with Special Effects pgs. 14, 15) • Auto Mode Lock • Auto Mode Release • Electronic Fog Filter • ND Effect • Sepia • Twilight • Sports • 1/1000 sec. High Speed Shutter •...
  • Page 3: Getting Started

    BN-V22U BN-V25U USING THE BATTERY PACK ATTACH BATTERY PACK Hook its top end to the camcorder and push the battery pack in until it locks in place. DETACH BATTERY PACK Slide BATT. RELEASE and pull out the battery pack. Push in.
  • Page 4 The CHG. indicator may not light properly with a brand new battery pack, or with one that’s been stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG. indicator should light during recharging. If not, contact your nearest JVC dealer. DC OUT...
  • Page 5: Clock (Lithium) Battery Insertion/Removal

    Set POWER to “CAMERA”. Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER Switch off the unit’s power and remove the power supply unit. OPEN COVER Open the clock battery compartment cover while pressing the release tab.
  • Page 6: Date/Time Setting

    MENU PROGRAM AE select dial NEAR – GAIN UP Menu Screen TELE MACRO INTERVAL TIMER REC TIME JLIP ID NO. SET CHARACTER DATE/TIME END :MENU KEY Set Time and Date Screen 1. 1. 00 10:4 5 CANCEL Date Time Day/Month/Year 24-hour indication Date/Time Setting SELECT MODE...
  • Page 7: Tape Length Setting

    If not, slide the tab. Some cassettes have removable tabs. If the tab has been removed, cover the hole with adhesive tape. The cassette holder can’t be opened while the camcorder is in the record mode. GETTING STARTED pg. 10) displayed in the (cont.)
  • Page 8: Grip Adjustment

    Recording Start/Stop button Grip Adjustment EXPAND LOOP Separate the Velcro strip. INSERT HAND Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate the Recording Start/Stop button and Power Zoom lever.
  • Page 9: Recording

    If you’re recording on a cassette from the middle, use the RETAKE function ( the last recording so you don’t erase any of it. The LENS COVER warning blinks for about 10 seconds when the camcorder is turned on, when the cover is closed.
  • Page 10: Basic Features

    RECORDING Basic Features Power zoom lever Zoom-in Zoom-out Zoom indicator FEATURE: Zooming PURPOSE: Varies the focal length of the lens and produces the zoom in/out effect. OPERATION: Zoom In 1) Pull the power zoom switch down toward “T”. Zoom Out 1) Push the switch up toward “W”.
  • Page 11 This is normal. FEATURE: Retake PURPOSE: To re-record certain segments. OPERATION: 1) Make sure the camcorder is in the Record–Standby mode. 2) Press either RETAKE button to reach the start point for new recording. Pressing “F” fast-forwards the tape and pressing “R”...
  • Page 12 •Do not use near flammable or explosive materials. •It is recommended that you consult your nearest JVC dealer for replacing the video light. ) does not blink in the pg. 15) is engaged, the...
  • Page 13: Advanced Features

    SYMBOL INDICATION LOCK AUTO LOCK Auto Mode Lock Locks the camcorder in Full Auto mode, preventing incorrect operation due to accidental button pressing during shooting. • In this mode the following controls are disabled; FADE, WIDE, TITLE, DISPLAY, M.W.B (Manual...
  • Page 14: Exposure Control

    DIAL VIEWFINDER SYMBOL INDICATION SEPIA Sepia The scene being shot is recorded in sepia-tinted (reddish-brown) monochrome, giving the effect of an older movie. Use together with Wide ( for the authentic look of a classic Hollywood movie. TWILIGHT Twilight Dusk, twilight scenery, fireworks, etc., look more natural and dramatic.
  • Page 15 This feature locks the focus in place, which is especially helpful in the following situations: •When things pass between your subject and the camcorder. Engage the focus lock function to lock your subject in before recording. •When you want your subject to be focused, and to appear in a corner of the screen.
  • Page 16 Power zoom lever NEAR PROGRAM AE select dial Manual Focus NOTE: You should already have made the necessary viewfinder adjustments ( pg. 6). If you haven’t, do so before continuing. SELECT MODE Turn the PROGRAM AE select dial to any position except AUTO LOCK.
  • Page 17: Start Recording

    Function indication Fade-Standby indication FADE SELECT button PROGRAM AE select dial SET button FADE IN FADE OUT RECORDING Fader This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and FADE fade-out works at recording end or when you enter Record–Standby mode.
  • Page 18 0 1 2 3 4 5 6 7 8 9 I L I KE YOU CLEAR Instant Titles The camcorder has eight preset titles in memory. You can superimpose one of them above a previously stored title as shown in the illustration to the left. DISPLAY...
  • Page 19 25.12.97 display mode using SET. Auto date record executed AUTO DATE RECORD Your camcorder automatically records the date for about 5 seconds after recording is initiated in the following situations: •After changing the date. •After loading a cassette. •After Auto Date Record mode is selected by pressing 25.12.97...
  • Page 20 To switch to automatic white balance adjustment, press SET until the indication disappears, or turn the PROGRAM AE select dial to “AUTO LOCK”. Re-adjust the White Balance when the lighting has changed, when the camcorder has been turned on and off again, or when the PROGRAM AE select dial’s position has been changed.
  • Page 21 RECORDING Using Menu For Detailed Adjustment This camcorder is equipped with Program Manager, an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. SELECT MODE Turn the PROGRAM AE select dial to any position except AUTO LOCK.
  • Page 22 1/4 S 1/2 S JLIP ID NO. This number is necessary when connecting the camcorder to a device such as a computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 07. SET CHARACTER Allows you to input characters.
  • Page 23 Self-Timer You can set the delay between pressing RECORDING START/STOP and the actual start of recording. If you 1MIN secure the camcorder, you (or whomever is operating the 1/2S camcorder) can enter the scene before recording starts. NOTE: Make sure the camcorder is in the Record-Standby mode before performing the following steps.
  • Page 24 NOTE: Make sure the camcorder is in the Record-Standby mode and the recording mode is set to “SP” before performing the following steps. ACCESS MENU SCREEN...
  • Page 25: Playback

    Recording safety hole PLAYBACK Cassette Adapter Use this to play back a VHS-C video cassette recorded with this camcorder. It is fully compatible with any VHS video cassette recorder. The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
  • Page 26: Basic Connections

    Audio and Video cables between the AUDIO and VIDEO connectors on the camcorder and those on the VCR. SUPPLY POWER Turn on the camcorder, the VCR and the TV. SELECT MODE Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
  • Page 27: Basic Playback

    Tape counter : Still Playback NOTE: PLAY/PAUSE Make sure you connect your camcorder as directed in “Basic Connections” ( LOAD A CASSETTE Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.
  • Page 28: Features

    PLAYBACK Features – COUNTER R/M PLAY/PAUSE STOP FEATURE: Manual Tracking PURPOSE: To eliminate noise bars that appear on the screen during playback. OPERATION: 1) Press either +/– button as many times as necessary for best picture. NOTES: To reset TRACKING to the original preset, press both + and –...
  • Page 29: Editing

    SELECT VCR MODE Engage the VCR’s AUX and Record-Pause modes. FIND EDIT-IN POINT To AUDIO and Engage the camcorder’s Play mode to find a spot VIDEO OUT just before the edit-in point. Once it’s reached, press connectors PAUSE on the camcorder.
  • Page 30: Random Assemble Editing [R.a.edit]

    REC STBY (you don’t need to press VCR CTL for this one). You’re now ready to try Random Assemble Editing. IMPORTANT Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions. NOTES: If the VCR’s power doesn’t come on in step 1, try...
  • Page 31 Press CANCEL during steps 2 and 3 to erase the most recently registered point. NOTES: For GR-AX838/AX638 only: The RM-V704U/V700U can be used to operate other camcorder functions as well. Point the RM-V704U/V700U at the camcorder’s remote sensor and press any of the following buttons (function apears in parentheses): —...
  • Page 32 R.A. Edit-capable JVC VCR. The recording deck can be... a VCR other than JVC, or a JVC VCR which has neither a Remote PAUSE nor an R.A. EDIT connector How to use: — Connect the playback deck and RM-V704U/V700U as AV IN shown on the left.
  • Page 33: Using Remote Control Unit

    USING REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (PLAY, STOP, PAUSE, FF, and REW) of your VCR. This remote control unit makes additional recording functions possible.
  • Page 34 Transmitted beam effective area Remote sensor (GR-AX838/AX638 only) When using the remote control, be sure to point it at the remote sensor. The above illustration shows the approximate transmitted beam effective area for indoor use. The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.
  • Page 35: Insert Editing

    ENGAGE INSERT EDITING MODE Press and hold INSERT, and without releasing INSERT, press and release PAUSE. The Insert mode is engaged, and the scene the camcorder is aimed at appears on the screen. BEGIN INSERT EDITING Press RECORDING START/STOP. When the counter reaches “0:00:00”, editing stops automatically and...
  • Page 36: Audio Dubbing

    A. DUB, press and release PAUSE. BEGIN AUDIO DUBBING Press PLAY. When the counter reaches “0:00:00”, Audio Dubbing stops automatically and the camcorder enters the Audio Dub-Standby mode. END AUDIO DUBBING Press STOP. NOTES: Do not press FF or REW during Audio Dub-Standby, or the edit points will not be accurate.
  • Page 37: Troubleshooting

    Remove the cassette and disconnect the power source, then after a few minutes, try turning the power back on. If it still doesn’t come on, consult your nearest JVC dealer. The recording tape’s Erase Protection tab is missing. Cover the hole with adhesive tape. (Some tapes have sliding tabs.
  • Page 38 Lens Cover Warning indicator blinks. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as usual from the beginning.
  • Page 39: Index Controls

    Controls Diopter Adjustment ... Power Zoom Lever ... BATT. [Battery] RELEASE Switch ... Recording Start/Stop Button ... POWER Switch ... STOP Button ... Tape Length [T30•45•60] Select Button ... COUNTER R [Reset]/M [Memory] Button ... EDIT Button ... Recording mode [SP/LP] Select Button ...
  • Page 40: Connectors

    Random Assemble Editing ( •It is used to connect the camcorder to a device such as a personal computer. For further detail consult your nearest JVC dealer. Information (in English) is also available at our home page: http://www.jvc-victor.co.jp/ DC IN Jack ...
  • Page 41: Viewfinder

    10 when power is turned on. Also displayed for pg. 8 about 5 seconds when clock battery becomes pg. 11 exhausted while using the camcorder. For inserting or replacing the clock pg. 10 battery ... pg. 18 Condensation Warning When this indication appears, all functions are pg.
  • Page 42: Cautions

    • When operating, keep a distance of about 30 cm between the video light and people or object. • Do not use near flammable or explosive materials. • Consult your nearest JVC dealer for replacing the video light unit. General Battery Precautions •...
  • Page 43: Main Unit

    Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer. For Your Maintenance 1. After Use Set the power switch to POWER OFF to turn off the camcorder.
  • Page 44: Specifications

    The RM-V704U/V700U cannot be used to operate the GR-AX338/AX337. The GR-AX338/AX337 can use the RM-V704U/ V700U only for R.A. Edit with a non-JVC VCR. Some acccessories are not available in some areas. Please consult your nearest JVC dealer for details on accessories and their availability.

This manual is also suitable for:

Gr-ax838Gr-ax638Gr-ax338Gr-ax337

Table of Contents