Panasonic SJ-MJ50GH Service Manual page 30

3. Press the
LCD).
4. Press the
LCD).
5. Set the laser power at 600
remote controller.
[Specified range: 600
Caution:
Proceeding on to the subsequent adjustment procedure with the read power
exceeding "over 660
6. Set the laser power with the
to "LDOK " in the LCD).
7. Press the
the LDC.
8. Remove the laser power meter. Laser power adjustment is finished.
[REFERENCE]
<For use of MD cartridge type laser power meter>
We recommend you to use a sensor type laser power meter for laser power
adjustment of this set.
key of the remote controller ("T0J " changes to "LD " of the
key of the remote controller ("LD " changes to "LP " of the
W±10% by using VOL+ and VOL- key of the
W±10%]
W" will result in damage to the optical pickup.
key of the remote controller ("LDOK " changes to "T0J " on
key of the remote controller ("LP " changes
30