Replacing The Filter - Hitachi EP-A6000 Instruction Manual

Filter Replacement
For the fi lters, use the optional EP-A6000-902 (dust fi lter) and EP-A6000-903 (deodorizing fi lter).
CAUTION
Before replacing the fi lter, be sure to stop the purifi er and unplug the power cord from AC outlet.
Remove the water tank, and then pull out the water tray.
(This procedure should be done to prevent water leakage.)
CAUTION
Remove the panel and the pre-filter.
Remove the used filter.
Remove the dust fi lter and then the deodorizing fi lter.
Take a new deodorizing filter
out of its plastic bag and
install it on the unit.
Install the deodorizing fi lter so that its black
surface faces the front (white surface in the
back).
Insert the fi lter all the way until the label
(deodorizing fi lter position indicator) is hidden.
Be sure to take the fi lter out of its plastic bag.
Do not block the fi lter front surface with
cloth or paper.
Same precautions should be taken for the
dust fi lter as well.
Take a new dust filter out of its
plastic bag and install it on the unit.
P. E- 8
Insert the filter all the way until the label (dust filter
position indicator) is hidden.
Install the pre-filter.
Reinstall the panel on the unit.
Install the water tray, and then mount the water tank.
No cleaning effect is obtainable if the fi lter is installed with plastic bag.
Note
It may also be a cause of malfunction.
E-24

Replacing the Filter

Use a genuine fi lter for the Hitachi Air Purifi er.
Other filters may cause unit failure.
When you remove the water tank, water may drip from the tank cap.
Lay a dry cloth before removing the water tank.
P. E- 8
CAUTION
(Continued)
P.E-8
Deodorizing filter
Dust filter
front side(Black)
Deodorizing filter
(Black surface)
P.E-8
P.E-9
The back
(White)
White
surface
Dust filter Deodorizing filter
P.E-9