LG DFSWLWT0A Instruction Manual page 3

MINI-SPLIT THERMOSTAT CONTROL PACKAGE
LG Electronics, Inc.
IMPORTANT – LG Mini-Split UNIT must be
unplugged before starting the installation.
Refer to Mini-Split Owner's Manual
1 Remove Front Grille Cover by pulling out the bottom of the front
grille and then lift up.
2 Remove Option Cover of the Control Box, located on the right
side, by removing the screw at the top.
3 Power up the LG Mini-Split UNIT.
4 Wire the Minisplit Control Card as per the diagram.
Once you have wired the card, place the sensor aligned to
the cover. Remove the adhesive cover and firmly press the
plastic housing to the Mini-split unit.
Installation Diagram of LG Mini-Split Control Board