Toshiba BU238M Instruction Manual page 47

● Registers
Register
TriggerMode
TriggerSequence
TriggerSource
TriggerAdditionalParameter
TriggerDelay
TriggerSoftware
● Setting
- Select trigger mode
Set the following value to "TriggerMode" register. Setting value is Enumeration type.
- Select trigger sequence
Set the following value to "TriggerSequence" register. Setting value is Enumeration type.
In Normal Shutter mode, the exposure time is determined by "ExposureTime" register value regardless of
"TriggerSequence" register setting.
- Select trigger source
Set the following value to "TriggerSource" register. Setting value is Enumeration type.
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
Visibility Access
Beginner R/W Selects Random Trigger Shutter mode.
Beginner R/W Selects trigger sequence.
Beginner R/W Selects trigger source of Random Trigger Shutter.
Expert R/W Sers the number of frames to exposure in Bulk mode.
Beginner R/W Sets trigger delay.
Beginner W Executes software trigger.
TriggerMode
Off (*)
On
TriggerSequence
TriggerSequence0 (*)
TriggerSequence1
TriggerSequence6
TriggerSource
Line0 (*)
TriggerSoftware
Description
Function
Normal Shutter Mode
Random Trigger Shutter mode
* initial factory setting
Function
Edge mode
Level mode
Bulk mode
* initial factory setting
Function
Hardware trigger
Software trigger
* initial factory setting
47 / 79
D4235159A
http://www.toshiba-teli.co.jp/index.htm